Dell OptiPlex 3000TC Service Manual page 49

Table 9. System setup options—Connection menu (continued)
Connection
Enable UEFI Network Stack
HTTPs Boot Feature
HTTPs Boot
HTTPs Boot Mode
Table 10. System setup options—Power menu
Power
USB Wake Support
Enable USB Wake Support
AC Behavior
AC Recovery
Active State Power Management
Aspm
Block Sleep
Deep Sleep Control
Intel Speed Shift Technology
Table 11. System setup options—Security menu
Security
Intel Platform Trust Technology
Intel Platform Trust Technology On
PPI ByPass for Clear Commands
Clear
Chassis intrusion
Enable or disable UEFI Network Stack and controls the on-board LAN
Controller.
By default, the option is enabled.
Enable or disable the HTTPs Boot feature.
By default, the HTTPs Boot option is enabled.
With Auto Mode, the HTTPs Boot extracts Boot URL from the DHCP. With
Manual Mode, the HTTPs Boot reads Boot URL from the user-provided data.
By default, the Auto Mode option is enabled.
When enabled, you can use the USB devices like a mouse or keyboard to wake
your computer from standby.
By default, the option is enabled.
Enables the system to turn on automatically, when AC is inserted.
By default, the Power Off option is enabled.
Enables or disables the Active State Power Management (ASPM) level
By default, the Auto option is enabled.
Enables to block entering sleep (S3) mode in the operating system.
By default, the Block Sleep option is disabled.
Enable or disable the Deep Sleep mode support.
By default, the Disabled option is enabled.
Enable or disable the Intel speed shift technology support.
By default, the Intel Speed Shift Technology option is enabled.
Enable or disable Intel Platform Trust Technology security options.
By default, the option is enabled.
Controls the TPM Physical Presence Interface (PPI).
By default, the PPI ByPass for Clear Commands option is disabled.
Enables to clear the PTT owner information and returns the PTT to the default
state.
By default, the Clear option is disabled.
Controls the chassis intrusion feature.
BIOS setup 49