Vivitek DU4771Z User Manual page 26

DLP Projector—User's Manual
3.
If more than one input device is
connected, press the SOURCE button
and use ▲▼ to scroll among devices.
(Component is supported through the
RGB to Component adapter.)
4.
When the "Power Off? /Press Power
again" message appears, press the
POWER button. The projector turns off.
Caution:
Do not unplug the power cord until the POWER LED stops flashing – indicating the projector has
cooled down.

HDMI 1: High-Definition Multimedia Interface
compatible

HDMI 2: High-Definition Multimedia Interface
compatible

HDMI 3 / MHL: High-Definition Multimedia Interface
and Mobile High-Definition Link compatible

VGA: Analog RGB
DVD input YCbCr/ YPbPr, or HDTV input
YPbPr via D-sub connector

Composite Video: Traditional composite video

HDBaseT: Support for distribution of HD video,
digital audio content, RS232, RJ45 and IR
function over standard CAT5e/6 LAN cable.
(Available in DU4771Z)
Note:
It is recommended to use a certified TX box (VIDEO
EXTENDER) – Rextron (EVBMN-110L38) for the
HDBaseT function and there is no guarantee of full
response when other brands of TX box are used..
Using a single HDBaseT CAT5e cable, the projector
supports an HDBaseT connection distances to
100m/328ft.
— 14 —