Reference drawings for stand
Please hire an installation service provider (for a fee) for the design and manufacture of a customized
stand to be used for portrait projection.
conditions:
•
Use the 7 screw holes at the back of the projector to secure it to the stand.
Screw hole center dimension: 290 (pitch = 160, 130) × 270 (pitch = 135) mm
Screw hole dimension on the projector: M4 with the maximum depth 12 mm
•
Horizontal adjustment mechanism (for example, bolts and nuts in 4 places)
•
Please design the stand so that it does not easily topple over.
The drawing showing the dimensional requirements is not an actual stand design drawing.
Please ensure that the design complies with the following
Air intake
Air exhaust
[Front View]
Horizontal adjuster
DLP Projector—User's Manual
– 7 –
Air intake
160.0
130.0
[ 6.30" ]
[ 5.12" ]
Air exhaust