• R6-S Thermistor type (Ex) damming sen- sor for indication of a high level. AFRISO EMA AB • Kilvägen 2, 232 37 Arlöv • Sweden • Phone +46-(0)40-92 20 50 • info@afriso.se • www.afriso.se...
The intrinsically safe circuit must not be earthed Observe regulatory requirements when connected in an EX-classified area AFRISO EMA AB • Kilvägen 2, 232 37 Arlöv • Sweden • Phone +46-(0)40-92 20 50 • info@afriso.se • www.afriso.se...
• Switch on the power and check sensor signals • Carry out a function control as shown in the commissioning instructions AFRISO EMA AB • Kilvägen 2, 232 37 Arlöv • Sweden • Phone +46-(0)40-92 20 50 • info@afriso.se • www.afriso.se...
K3: G: common = - feed to sensor Recommended cable Power supply: 3 x 1.5 mm² Multi-core cable to junction box: 7 x 1 mm² AFRISO EMA AB • Kilvägen 2, 232 37 Arlöv • Sweden • Phone +46-(0)40-92 20 50 • info@afriso.se • www.afriso.se...
Page 6
Damming sensor Inlet Outlet Level sensor Sludge sensor H*: the precise installation depth is specified in the separator manual. AFRISO EMA AB • Kilvägen 2, 232 37 Arlöv • Sweden • Phone +46-(0)40-92 20 50 • info@afriso.se • www.afriso.se...
• Switch on the power supply to the elec- tronic unit AFRISO EMA AB • Kilvägen 2, 232 37 Arlöv • Sweden • Phone +46-(0)40-92 20 50 • info@afriso.se • www.afriso.se...
Page 8
V (3 sec) = DONE minimise the risk of false alarms when the alarm level is close to the sensor. AFRISO EMA AB • Kilvägen 2, 232 37 Arlöv • Sweden • Phone +46-(0)40-92 20 50 • info@afriso.se • www.afriso.se...
Page 9
2 minutes. The unit should then return to “Normal operation screen”. AFRISO EMA AB • Kilvägen 2, 232 37 Arlöv • Sweden • Phone +46-(0)40-92 20 50 • info@afriso.se • www.afriso.se...
Page 10
Check the sensor and its connection (see the Troubleshooting section). Sensor err on input X see manual for action [Reset]=mute AFRISO EMA AB • Kilvägen 2, 232 37 Arlöv • Sweden • Phone +46-(0)40-92 20 50 • info@afriso.se • www.afriso.se...
R1, R2 or both. To stop scrolling, hold down Reset for 3 seconds. The Reset unit then returns to its normal display. AFRISO EMA AB • Kilvägen 2, 232 37 Arlöv • Sweden • Phone +46-(0)40-92 20 50 • info@afriso.se • www.afriso.se...
“Sensor err on input x (sludge)” Measure voltage at sensor Error in sensor circuit to sensor (e.g. alarm appears in the display cable failure/short-circuit) AFRISO EMA AB • Kilvägen 2, 232 37 Arlöv • Sweden • Phone +46-(0)40-92 20 50 • info@afriso.se • www.afriso.se...
Page 13
15.3 V Sensor in water (normal operation) When the sensor output is inactive, the voltage at the output is 0 volts. AFRISO EMA AB • Kilvägen 2, 232 37 Arlöv • Sweden • Phone +46-(0)40-92 20 50 • info@afriso.se • www.afriso.se...
MTA 6 Separator alarm OSA 3 • Manual TECHNICAL DATA Central element ATEX standard EN IEC 60079-0 (2018) MTA 6 EN 60079-11 (2012) Certificate number SP 16ATEX3652X Intrinsically safe design II (1) G [Ex ia Ga] IIA Intrinsically safe circuit is galvanically isolated from earth.
Page 15
Product Quality Assurance: Presafe 18 ATEX 12341Q Notification Notified Body DNV; Notified body number 2460 Afriso Ema AB declares under our sole responsibility, that the equipment specified above conforms to the above mentioned Directives and Standards. 2021-05-24 Date: Signed: Jonas Ericson Nihlstorp Afriso Ema AB, Kilvägen 2 , SE-232 37 Arlöv, Sweden...
Page 16
Notes Afriso Ema AB Kilvägen 2 • 232 37 Arlöv • Sweden Phone: +46-(0)40-92 20 50 www.afriso.se...
Need help?
Do you have a question about the MTA 6 and is the answer not in the manual?
Questions and answers