Table Of Contents; General Safety Warnings - Stiga CS 48 Li 16 Operator's Manual

WARNING: READ THOROUGHLY THE INSTRUCTION BOOKLET
EN
BEFORE USING THE MACHINE. Keep for future reference

TABLE OF CONTENTS

1. GENERAL SAFETY WARNINGS ................. 1
2. SYMBOLS .................................................... 4
3. DESCRIPTION ............................................. 5
4. ASSEMBLY ................................................... 5
5. OPERATION ................................................. 6
6. MAINTENANCE ........................................... 8
7. STORAGE .................................................... 9
8. DISPOSAL .................................................... 9
9. TROUBLESHOOTING ................................ 10
Your product has been engineered and
manufactured to high standard for dependability,
ease of operation, and operator safety. When
properly cared for, it will give you years
of rugged, trouble-free performance.
For use with 43.2V 4Ah (146 Wh) battery only.

1. GENERAL SAFETY WARNINGS

Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric
shock, fire and/or serious injury
INTENDED USE:
• This chainsaw is designed for cutting
branches, trunks, logs and beams of a
diameter determined by the cutting length
of the guide bar. It is only designed to cut
wood. It is only to be used in an outdoor,
domestic application by adults.
ser types: This machine is intended for use
U
by consumers, i.e. non-professional operators.
The machine is intended for "DIY" use only"
NON-INTENDED USE:
• Do not use the chainsaw for any
purpose not listed above.
• This chainsaw is not to be used for
professional tree services. It is not
to be used by children or by persons
not wearing adequate personal
protective equipment and clothing.
RESIDUAL RISKS:
Even with the intended use of the
appliance, there is other risk which cannot
be prevented. According to the type and
construction of the appliance, the following
potential hazards might happen:
• Contact with exposed saw teeth of
the saw chain (cutting hazards).
• Access to the rotating saw
chain (cutting hazards).
• Unforeseen, abrupt movement of
the guide bar (cutting hazards).
• Flung out of parts from the saw chain
(Cutting / injection hazards).
• Flung out of parts of the work piece.
• Inhalation of work piece particles.
• Skin contact with the fuel oil.
1