Table of Contents
Advertisement
11. ASSISTANCE AND REPAIRS
This manual provides all the necessary
information to run the machine and for correct
basic maintenance operations which can
be performed by the user. Any regulations
and maintenance operations not described
herein must be carried out by your Dealer
or Authorised Service Centre, which have
the necessary knowledge and equipment to
ensure that the work is carried out correctly,
maintaining the correct degree of safety and the
original operating conditions of the machine.
Any operations performed in unauthorised
centres or by unqualified persons will
invalidate the Warranty and all obligations
and responsibilities of the Manufacturer.
• Only Authorised Service Centre or dealers can
carry out guaranteed repairs and maintenance.
• The Authorised Service Centre or dealers
only use genuine spare parts. Genuine
spare parts and attachments have been
designed specifically for machines.
• Non-genuine spare parts and attachments
are not approved. Use of non-genuine
spare parts and attachments cause
the warranty to be invalidated.
13. MAINTENANCE TABLE
Intervention
MACHINE
Check all fasteners
Safety checks/check controls
Check the chain catcher
Check the machine and bar lubrication holes
General cleaning and inspection
Cleaning the chain
Clutch housing bearing greasing
Check the chain brake metal band
Check the chain drive sprocket
Chain maintenance
Bar maintenance
ENGINE
Checking/topping up fuel level
Topping up the chain oil level
General cleaning and inspection
• It is advisable to send your machine
once a year to an Authorised Service
Centre or dealer for servicing, assistance
and safety device inspection.
12. WARRANTY COVERAGE
The warranty covers all material and
manufacturing defects. The user must
follow all the instructions provided in
the accompanying documentation.
The warranty does not cover
damages caused by:
• Failure to become familiar with the
documentation accompanying the machine.
• Carelessness.
• Incorrect or prohibited use or assembly.
• Use of non-genuine spare parts.
• Use of attachments not supplied or
approved by the manufacturer.
The warranty does not cover:
• Normal wear and tear of consumables,
such as cutting means, safety bolts.
• Normal wear and tear.
The purchaser is protected by his or her own
national legislation. The purchaser's rights under
the national laws or his or her own country are
not in any way restricted by this warranty.
Frequency
First time
And then after
-
-
-
-
Before each daily use
-
-
-
-
-
-
-
-
-
Whenever refuelling
-
EN - 17
every
Before each use
Before each use
Before each use
After each use
After each use
30 hours
Once a month
Once a month
-
-
Before each use
After each use
Paragraph
7.9
6.2
7.7
7.8
7.5
7.6
7.5 *
8.2 *
8.3 *
8.6, 14
8.7
7.3.
7.4.
7.5
Advertisement
Table of Contents
