HYGGER HG-028 - Aquarium Bluetooth LED Light Manual

PRODUCT FEATURES

1. Smart APP control Aquarium LED Light: The aquarium light use APP to control the connection, no need to connect an external controller, no need for alignment control. It's simple, intuitive, and requires no wifi network.
2. Different scene modes: There are 5 choices: daylight scene, moonlight scene, sea water scene, fish scene and DIY mode.
3. 24/7 Lighting cycle: This fish tank light creates 24-hour gradual sunrise, sunset and moonlight for a natural rhythmic light cycle.
4. Memory Function: If power failure, the light turns on at 100% full spectrum once restore. Then the light will revert back to the previous mode within one hour.
5. Super bright and High color rendition LED light:
   • Premium 5054 LED provide bright illumination for your plants, fish and enhance the aesthetic appeal of your tank.
   • The color rendering index is close to natural light, up to 95%, protecting eyes and fish, to refuse the discomfort caused by stroboscopic for fish and viewers.
6. Extendable bracket: Extendable bracket makes the light fits different size aquariums in extendable range.
7. Suitable for plants and freshwater: The full-spectrum bulbs can produce different colors depending on your options. This product is recommended use for freshwater aquariums.

PRODUCT PARAMETERS

INSTRUCTIONS

APP Control

STEP 1 - LED Light installation

1. Unpack the box and check if the light and other accessories are included. If missing parts, pleas contact the seller.
2. Install the Holder onto the edge of the aquarium and secure it with the screws. The Holder must be secured firmly enough to prevent the light from falling into the water.
3. Position the fixture over the hole of the "Holder" by adjusting the "Stand bar" to a proper height so that it can securely hold the fixture in place.
4. Connect the power supply with the light, then plug it in. Ensure a drip loop is created before the outlet as shown in the warning.

STEP 2 - Method of application

1. Install the TUYA app
   Method 1: Enter the mobile app store, search for and download the TUYA app.
   Method 2: Scan QR Code to download the TUYA app and install it.

2. Turn on the bluetooth of your phone (Wifi is no request), and open the "TUYA" app.
   
3. 1. If you are connecting our light for the first time, please turn on the light directly, then click the "Add Device" on the phone, the system will be searching.
   2. If you have connected lights before and want to control one more light, please plug and unplug the power three times for the new light. You'll find the lights flashing, which means entering the connected app state, then add device.
4. After discover the devices, click "Add" to load, click the "Green" power button in the app.
   

STEP 3 - Settings and applications

Options of Lighting Scenes,
if the button is blue it is turned ON,
if the button is gray it is turn OFF,
means ON
means OFF

Sunlight mode: is a white light for general use with high color rendition.
Moonlight mode: is a gentle, relaxing white light; use in (for) night or dark environment.
Fishlight mode: warm white light with more red spectrum for color enhancement.
Ocean blue light mode: Simulate the colors of the ocean with more blue spectrum.
Sunrise/Sunset mode: Simulate the Sunrise&Sunset with your preferred lighting settings every day.
8 Timers mode: Customize your preferred lighting scene for each timer.
User Defined mode: Save custom settings; adjust your preferred colors/ brightness.

How to set "Sunrise and Sunset" mode

1. Press edit the time for Sunrise and Sunset:
   

2. Edit the time of Sunrise:
   
3. Edit the time of Sunset:
   
4. Select the lighting scenes for Sunrise Sunset:
   
5. Sunrise&Sunset lighting chart:
   

How to set 8 Timers mode

1. Press enter the setting interface
   
2. Set the time/Light Scene/Brightness for L1-L8 and Save
   
   You can set below example for programmable with 8 channels:
   L 1: at 00:00 turn on "Moon light" with 100% intensity;
   L2: at 03:00 turn on "Moon light" with 50% intensity;
   L3: at 06:00 turn on "Moon light" with 0% intensity;
   L4: at 09:00 turn on "Fish light" with 60% intensity;
   L5: at 12:00 turn on "Coral light" with 100% intensity;
   L6: at 18:00 turn on "Day light" with 60% intensity;
   L7: at 20:00 turn on "Moon light" with 30% intensity;
   L8: at 23:00 turn on "Moon light" with 60% intensity;

How to set "User defined" mode

Press to edit the time of 8 Timers;

1. Press to edit the User Defined
   
2. First, you can give a new scene name, for example "My light"
3. Then adjust the RGB, brightness and color temperature, finally save it.
4. Return to home page, the you will find the scene name has changed to "My light"
   
5. Then you can find and select "My light"scene as your choose when you set the Sunrise sunset and 8 Times set mode
   

How to reset the light

Keys control

Power switch: Press button to turn on or turn off the light.
Mode setting: It includes 4 modes, Sunlight mode, Moonlight mode, fish light mode and coral light mode. You can adjust different modes.
Brightness Dimming: hygger LED light's brightness can be adjusted with 10 levels, from 10% up to 100%.

PACKAGE INCLUDED

I x Led Light
1 x AC-DC adaptor
2 x Metal brackets
1 x User manual

IMPORTANT SAFETY INSTRUCTIONS

To guard against injury, basic safety precautions should be observed, including the following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS

1. You should read all the important notices on the appliance before using. Failure to do so may result in loss of fish life or damage to this appliance.
2. 
   To avoid possible electric shock, special care should be taken since water is employed in the use of aquarium equipment. For each of the following situations, do not attempt to repair by yourself. Return the appliance to an authorized service facility for service or discard the appliance.
   • Carefully examine the appliance after installation. Do not operate any appliance if it has a damaged cord or plug, or if it is malfunctioning or it is dropped or damaged in any manner. The power cord of this appliance cannot be replaced. If the cord is damaged, the appliance should be discarded. Never cut the cord.
   • To avoid the possibility of the appliance plug or receptacle to one side of a wall mounted receptacle to prevent water from dripping onto the receptacle or plug. A "drip loop" (see illustration) should be arranged by the user for the cord connecting appliance to a receptacle. The drip that part of the cord below the level of the receptacle or the connector if an extension cord is used to prevent water traveling along the cord and coming in contact with the receptacle. receptacle does get wet, do not unplug the cord. Disconnect the fuse or circuit breaker that supplies power to the appliance. Then unplug and examine for presence of water in receptacle.
     
3. This appliance is not intended for use by persons (including children) with significantly impaired physical or mental capabilities, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Children should always be supervised to ensure that they do not play with the appliance.
4. To avoid injury, do not touch moving parts or hot parts.
5. 
   Always unplug or disconnect all appliances in the aquarium from electricity supply before placing hands in water, before putting on or taking off parts and while the equipment is being installed, maintained or handled. Never yank cord to pull plug from outlet. plug and pull to disconnect. Always unplug an appliance from an out let when not in use.
6. Do not install or store the appliance where it will be exposed to weather or temperatures below freezing. For indoor household use only. Do not immerse.
7. Make sure the appliance is mounted correctly and securely positioned on the aquarium before operating the appliance.
8. If an extension cord is necessary, a cord with proper rating should be used. A cord rated for less amperes or watts than the appliance rating may overheat. Care should be taken to arrange the cord so that it will not be tripped over or pulled. The connection should be carried out by a qualified electrical installer.
9. The socket-outlet shall be installed near the equipment and shall be easily accessible.

CONTACT INFORMATION

Brand owner: Shenzhen Mago Trading Co., Ltd
Add: Bantian Group Business Central, Longgang District, Shenzhen City, Guangdong Province, China
WhatsApp: +12028664104
Website: www.hygger-online.com
E-mail: Mago@hygger-online.com
Please provide your amazon order id (amazon invoice) and shipping address by E-mail: mago@hygger-online.com if you have any problems.

Company: E-CrossStu GmbH
Address: Mainzer Landstr.69,60329
Frankfurt am Main
E-mail: e-crossstu@outlook.com
Tel: +49 69332967674

CET Product Service Ltd.
Beacon House Stokenchurch Business
Park, lbstone Rd, Stokenchurch
High Wycombe HP14 3FE UK
info.cetservice@gmail.com
+447419325266