Page 2
2.HG026 PRODUCT PARAMETERS AND INSTRUCTION (1)Unpack the box and check if the light and other accessories are included. If missing parts, please contact the seller. (2)Install the Holder onto the edge of the aquarium and secure it with the screws. The Holder must be secured firmly enough to prevent the light from falling into the water.
Page 3
3.HG028 PRODUCT PARAMETERS AND INSTRUCTION (1)Unpack the box and check if the light and other accessories are included. If missing parts, please contact the seller. (2)Expand both sides’ metal bracket fit to match the length of your aquarium. (3)Connect the power supply with the light, then plug it in. Ensure a drip loop is created...
Page 8
If you encounter the following situation: 1.Your phone can't connect to the APP light 2. Connect to a new mobile device Please plug and unplug the DC supply three times, each time with an interval of 10 seconds. After the indicator blinks for three times, the device is reset successfully and ready for pairing.
Page 9
FOR HG028 RESET FOR HG026 RESET unplug and plug in 3 times 1.Plug in the power adapter 2.After 10 seconds, unplug and 3.Then wait for a few seconds, the plug in the connector between light will flash, at this time, the light...
Page 10
SOLUTION 1: If power failure or going out, causing the APP connection to be disconnected. Step1. In the Doodle APP interface directly drop down to update. SOLUTION 2:If power failure or going out, causing the APP connection to be disconnected. Tthere is no need to reset the operation, just turn on the Bluetooth again and click on the main doodle interface to refresh it.
Need help?
Do you have a question about the HG028 and is the answer not in the manual?
Questions and answers