Table of Contents
Advertisement
7-9) Function of Ice/Water Dispenser when they are equipped.
}
SO
PR
RNR
RENE
UR aoe
@ This function only applies to a model equipped with ice-maker.
@ This function is limited to a model from which ice and water can be taken out
from outside without opening door.
@ Cube Ice / Crushed Ice/ Stop (Off) Function
1) At the time of intial power on, when inside temperature of freezer is more than 5°C,
Cube Ice LED light on display is lit on, and Crushed Ice LED light keeps light-off
state. But when power is turned on, if inside temperature of freezer is less than 5'C,
Micom
recalls form of ice which was set up before power off so that it displays the
memorized ice form.
.
2) "Cube" — "Crushed" — "Ice Off' is selected in turn by ice selecting Key.
3) In case of selecting "Crushed" mode, it operates Gear Motor to eject crushed ice
to outside when ice lever operates as ice is made in the bowl of ice machine.
4) In case of selecting "Cube" mode, Gear Motor and ice solenoid operate to eject
cube ice to the outside when.ice lever operates as ice is made in the vessel of
ice machine.
5) If "Ice Off" is selected, it stops only ice-making function of ice-maker so
that ice is not made.
@ At the moment of selecting "Ice Off', ice-making function stops. But, if it is in
the process of ice-isolating, returning to horizontal state and supplying
water, it maintains stoppage state after water supply is completed.
@ Even when "Ice-Off" function is operating, ice eject lever operates normally.
This is not a defect. Therefore, remained ice in the ice container can be used
normally.
© Ice Timer Function
1) If you press ice timer button, it is automatically set to Ice-Off mode regardless of
present setup condition of ice mode (Cube / Crushed / Ice Off), and ice lamp is
turned on. And time is set to 3 days on temperature control display of freezer at first.
And each time you press the ice button, the number increases one by one. And if it
reaches 30 days, it resumes from 3 days.
2) Among ice timer functions, if you press ice selecting key, ice timer function
is cancelled.
3) If reservation is made by ice timer button, setup temperature of freezer returns to
temperature display of freezer after S5sec.. At this moment, if ice timer button is
pressed again, it displays the previous reserved date again.1-2 days before the
reserved date is completed, ice maker starts operating. And when the reserved date
is completed, more than half of ice bucket is filled.
4) If ice timer is reserved and vacation function operates, vacation function
ends at the same time when ice timer function ends.
Advertisement
Table of Contents
