Subscribe to Our Youtube Channel
Related Manuals for turck RI360P1-DSU35TC-ELI-EXI
Summary of Contents for turck RI360P1-DSU35TC-ELI-EXI
- Page 1 RI360P1-DSU35TC-ELI-EXI Inductive Angle Sensor with Analog Output Instructions for Use...
-
Page 2: Table Of Contents
14 Technical data........................... 20 15 Appendix ............................ 21 15.1 Approvals and markings ..................... 21 16 Turck branches — contact data .................... 22 V01.00 | 2023/06 | 2 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 3: About These Instructions
If you have any suggestions for improving the design or if some information is missing in the document, please send your suggestions to techdoc@turck.com. V01.00 | 2023/06 | 3 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 4: Notes On The Product
2 lock washers A5 2 cable glands (blue) Dummy plug Turck service Turck supports you in your projects – from the initial analysis right through to the commission- ing of your application. The Turck product database at www.turck.com offers you several soft- ware tools for programming, configuring or commissioning, as well as data sheets and CAD files in many export formats. -
Page 5: For Your Safety
The product is designed according to state of the art technology. Residual hazards, however, still exist. Observe the following safety instructions and warnings in order to prevent danger to persons and property. Turck accepts no liability for damage caused by failure to observe these safety instructions. -
Page 6: Product Description
Measuring range can be adjusted via teach button in the terminal chamber Analog output, 4…20 mA Immune to electromagnetic interference 14…30 VDC V01.00 | 2023/06 | 6 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 7: Functional Principle
The following settings can be made using the teach button in the terminal chamber: Desired measuring range with start and end values Effective direction of the encoder Reset to factory settings V01.00 | 2023/06 | 7 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 8: Technical Accessories
Sensor hole pattern on flange: 30 × 130 mm; connection shaft (shaft extension) height: ø max. 30 ø max. 65 50 mm/Ø max. 75 mm V01.00 | 2023/06 | 8 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 9 SIL2 acc. to IEC61508; Ex-proof version; selectable with either current source/sink or voltage output; removable screw terminals; 24 VDC power supply 12.5 V01.00 | 2023/06 | 9 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 10: Installing
0.65 mm. „ Attach the positioning element. The nominal distance between the sensor and position- ing element is 1 mm. V01.00 | 2023/06 | 10 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 11: Mounting The Sensor On Ferrous Shafts (Ø > 14 Mm)
0.65 mm. „ Attach the positioning element. The nominal distance between the sensor and position- ing element is 1 mm. V01.00 | 2023/06 | 11 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 12: Connection
Connect the open end of the connection cable to the power source and/or evaluation devices in accordance with the wiring diagram. V01.00 | 2023/06 | 12 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 13: Commissioning
Commissioning Commissioning After connecting and switching on the power supply, the device is automatically ready for op- eration. V01.00 | 2023/06 | 13 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 14: Operation
The positioning element is in the measuring range with limited signal quality (e.g. distance too great). Yellow flashing The positioning element is not within the detection range. V01.00 | 2023/06 | 14 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 15: Setting
The effective direction of the encoder is set clockwise (CW) or counterclockwise (CCW). Factory setting Resets the sensor to factory settings. V01.00 | 2023/06 | 15 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 16: Setting Via The Easy-Teach Function
Remove the housing part above the terminal chamber. Fig. 6: Removing the housing part Setting options for the Easy-Teach function Fig. 7: Carrying out the teaching-in procedure V01.00 | 2023/06 | 16 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 17 The status LED flashes 4 × yellow (3). The set start and end points are reset to factory settings and the effective direction is reset to CW. V01.00 | 2023/06 | 17 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 18: Troubleshooting
If there are no faults, there is a device malfunction. In this case, decommission the device and replace it with a new device of the same type. V01.00 | 2023/06 | 18 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 19: Maintenance
The devices are maintenance-free, clean dry if required. Repair The device must not be repaired by the user. Take defective devices out of operation and re- turn them to Turck for an error analysis. Observe our return acceptance conditions when re- turning the device to Turck. 12.1... -
Page 20: Technical Data
Positioning element P1-Ri-DSU35, countersunk screw M6 × 25, 2x cylinder screws M5 × 12, 2x lock washers A5, 2x cable glands (blue), 1x dummy plug V01.00 | 2023/06 | 20 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 21: Appendix
Max. surface temperat- temperature +79 °C T106 °C 1000 mW +73 °C T100 °C 1000 mW +66 °C T85 °C 600 mW +62 °C T85 °C 800 mW +58 °C T85 °C 1000 mW V01.00 | 2023/06 | 21 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 22: Turck Branches - Contact Data
Via San Domenico 5, IT-20008 Bareggio (MI) www.turckbanner.it Japan TURCK Japan Corporation ISM Akihabara 1F, 1-24-2, Taito, Taito-ku, 110-0016 Tokyo www.turck.jp V01.00 | 2023/06 | 22 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 23 United Kingdom TURCK BANNER LIMITED Blenheim House, Hurricane Way, GB-SS11 8YT Wickford, Essex www.turckbanner.co.uk Turck Inc. 3000 Campus Drive, USA-MN 55441 Minneapolis www.turck.us V01.00 | 2023/06 | 23 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 24 Over 30 subsidiaries and 60 representations worldwide! 100046871 | 2023/06 100046871 www.turck.com...
Need help?
Do you have a question about the RI360P1-DSU35TC-ELI-EXI and is the answer not in the manual?
Questions and answers