Axis Q6074 PTZ User Manual page 7

AXIS Q60 Series
Configure your device
Note
• WDR can cause artifacts in the image.
• WDR may not be available for all capture modes.
1. Go to Video > Image > Wide dynamic range.
2. Turn on WDR.
3. To set the amount of WDR, select Low, Medium or High from the WDR level list.
4. If you still have problems, go to Exposure and adjust the Exposure zone to cover the area of interest.
Find out more about WDR and how to use it at axis.com/web-articles/wdr.
Verify the pixel resolution
To verify that a defined part of the image contains enough pixels to, for example, recognize license plates, you can use the pixel
counter.
1. Go to Video > Image and click
2. Click
3. In the camera's live view, adjust the size and position of the rectangle around the area of interest, for example where you
expect license plates to appear.
You can see the number of pixels for each of the rectangle's sides, and decide if the values are enough for your needs.
Hide parts of the image with privacy masks
You can create one or several privacy masks to hide parts of the image.
ABC 123
.
for Pixel counter.
7