Page 2
WARNING • Dangerously high voltages are present inside the TV. • TV operating voltage: 110 – 240 V AC. • Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground.
Table of Contents Installation Menu Adjustment Securing the TV ........4 Introducing the WEGA GATE navigator ..........15 Getting Started ........5 Setting up your TV “Settings” Adjustment ...... 16 (“Initial Setup”) ........6 Changing the “Picture” setting ..17 Changing the “Sound”...
Installation x Securing the TV To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV. 20 mm 3.8 mm screws clamps band Screw the band to the TV stand and to the provided hole at the rear of your TV. (1) Put a cord or chain through the clamps.
x Getting Started Step 1 Insert the batteries (supplied) into the remote. Note • Do not use old or different types of batteries together. Step 2 Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV. Tips •...
x Setting up your TV (“Initial Setup”) When you turn on your TV for the first time, the “Initial Setup” menu will appear. You may change the menu language, preset the TV channels automatically, edit the channels and adjust the picture position using the buttons on the remote control or TV front panel.
Page 7
2) To skip the program number, press V or v to select “On”. Then press You can skip this program number when using PROG +/-. Select Confirm Exit 3) To block unwanted program number, press V or v to select .
Overview of Controls TV front and rear panels TV rear panel TV front panel WEGA GATE MIC 1 MIC 2 L(MONO) PROG Button/Terminal Function Page Turn off or turn on the TV. Standby indicator. Wake Up indicator. Remote control sensor. –...
Using the remote control and basic functions PROG WEGA WEGA RETURN RETURN GATE GATE Button Description Page Turn off temporarily or turn on the TV. – Display the TV program. – Jump to last program number that has been – watched for at least five seconds.
Page 10
continued Button Description Page WEGA GATE menu operations Confirm selected items. WEGA GATE Display or cancel the WEGA GATE menu. V, v, B, b Select and adjust items. RETURN Return to the previous level. Timer operations Set TV to turn on automatically according to the –...
Advanced Operations Selecting the picture and sound modes You can select picture and sound modes and adjust the setting to your preference in the “Custom” option. Selecting the picture mode Press to select the desired picture mode. Select To view “Vivid”...
x Enjoying the Party Mode You can sing duet along with any music program of TV broadcast or with any audio/video equipment or create visual presentations (e.g., photos or video stories) with narration and favorite background music by using the Party Mode feature.
Listening to the FM Radio You are able to listen to the FM radio stations using your TV. To access to FM Radio mode: Press WEGA GATE button and select “FM Radio” (see page 15). Press FM button on the front panel (see page 8). To exit from FM Radio mode: Press WEGA GATE button, select the desired items: “TV”...
Enjoying stereo or bilingual programs You can enjoy stereo sound or bilingual programs of MTS (Multi-Channel TV Sound) stereo system by using A/B button. Select stereo or bilingual programs Press A/B until you receive the sound you want. Select To listen to “Stereo”...
Menu Adjustment Introducing the WEGA GATE navigator WEGA GATE is a gateway that allows you access to preset TV channels, connected external inputs, FM Radio mode, Party Mode and “Settings” menu. WEGA GATE “TV” External Inputs watch the preset TV FM Radio channels (see page 6) Party Mode...
x “Settings” Adjustment You are able to change the settings of your TV from “Settings” in WEGA GATE menu. Press WEGA GATE button to display WEGA GATE menu. Press V or v to select “Settings” and press The following is an overview of the items that can be adjusted. ”Picture”...
x Changing the “Picture” setting The “Picture” menu allows you to adjust the picture settings. Press WEGA GATE and select “Settings”. Make sure the “Picture” icon ( ) is Picture Picture Mode: Vivid selected, then press Picture Adjustment Color Temperature: Cool Intelligent Picture: Select...
x Changing the “Sound” setting The “Sound” menu allows you to adjust the sound settings. Press WEGA GATE and select “Settings”. Press V or v to select the “Sound” Sound Sound Mode: Dynamic icon ( ), then press Sound Adjustment Balance Intelligent Volume: Surround:...
x Changing the “Channel Setup” setting The “Channel Setup” menu allows you to preset channels automatically, manually preset channels, edit the channels and preset FM radio stations. Press WEGA GATE and select “Settings”. Press V or v to select the “Channel Setup” Channel Setup icon ( ), then press...
x Changing the “Setup” setting The “Setup” menu allows you to change the menu language, adjust the picture position, label the connected equipment, select the color system and reset your TV to factory settings. Press WEGA GATE and select “Settings”. Setup Press V or v to select the “Setup”...
Additional Information x Connecting the 3D WOOFER You can enjoy high quality sound by connecting the 3D WOOFER as follows: Step 1 Step 2 3D WOOFER Red wire Black wire Notes • Connect only the supplied 3D WOOFER; otherwise your TV may malfunction. •...
continued Antenna cable TV rear panel TV, CATV, Satellite (not supplied) When there is no FM signal Antenna selector FM signal TV signal Audio/Video cable (not supplied) S Video cable (not supplied) Antenna cable DVD player (not supplied) Note • When both (S video) and (video) for t1 are connected at the same time, (S video) is automatically selected.
Connecting to the component video input terminal ( TV rear panel Component video cable (not supplied) DVD player Audio cable (not supplied) Notes • If your DVD player can output interlace and progressive mode signals, select the interlace output when connecting to (component video input) on your TV.
• Check the antenna cable and connection on the TV, VCR and at the wall noisy sound (see page 21). • Check the antenna setup. Contact a Sony dealer for advice. • Preset the channel again (see page 19). • Try using an external booster.
Page 25
(switch) to your TV (see page 21). • Count the number of times the 1 (standby) indicator flashes. The 1 (standby) indicator on your Press ! (main power) to turn off your TV. Contact your nearest Sony TV flashes red service center. several times after every three seconds.
Specifications KV-SR252N63K KV-SR292N63K Note Power requirements 110-240 V AC, 50/60 Hz Power consumption (W) Indicated on the rear of the TV Television system Color system NTSC3.58, PAL*, PAL 60*, SECAM*, NTSC 4.43* * AV IN only Stereo/Bilingual system Channel coverage VHF : 2 to 13 /UHF : 14 to 69 /CATV : 1 to 125 8 (Antenna) 75-ohm external terminal...