Summary of Contents for ICON Health & Fitness PFEL51217.1
Page 1
USER’S MANUAL Model No. PFEL51217.1 Serial No. Write the serial number in the space above for reference. Serial Number Decal ACTIVATE YOUR WARRANTY To register your product and activate your warranty today, go to my.proform.com. CUSTOMER CARE For service at any time, go to proformservice.com.
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on your elliptical before using your elliptical. ICON assumes no responsibility for personal injury or property damage sus- tained by or through the use of this product.
Page 4
17. The heart rate monitor is not a medical 19. Keep your back straight while using the device. Various factors may affect the accu- elliptical; do not arch your back. racy of heart rate readings. The heart rate monitor is intended only as an exercise aid 20.
BEFORE YOU BEGIN Thank you for selecting the revolutionary PROFORM reading this manual, please see the front cover of this ® HYBRID ENDURANCE 1120 E elliptical. The HYBRID manual. To help us assist you, note the product model ENDURANCE 1120 E elliptical provides an impressive number and serial number before contacting us.
PART IDENTIFICATION CHART Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity needed for assembly.
ASSEMBLY • To hire an authorized service technician to • To identify small parts, see page 7. assemble this product, call 1-800-445-2480. • In addition to the included tool(s), assembly • Assembly requires two persons. requires the following tools: one Phillips screwdriver •...
Page 9
3. Orient the Rear Stabilizer Cover (2) as shown, and press it onto the Frame (1). Attach the Rear Stabilizer Cover (2) with two M4 x 16mm Screws (104). 4. With the help of a second person, place some of the packing materials (not shown) under the front of the Frame (1).
Page 10
5. Orient the Front Stabilizer Cover (8) as shown, and route the Power Cord (not shown) over the top of the Front Stabilizer Cover. Then, press the Front Stabilizer Cover onto the Frame (1). Attach the Front Stabilizer Cover (8) with two M4 x 16mm Screws (104).
Page 11
7. Locate the Right Upper Saddle Bracket (121) on the Right Roller Arm (45). Next, locate the Lower Saddle Bracket (26) on the right side of the elliptical. Attach the Right Upper Saddle Bracket (121) to the Lower Saddle Bracket (26) with two M10 x 70mm Screws (139).
Page 12
9. Attach the Tablet Holder (50) to the Console (7) with four Tablet Holder Screws (52); start all the Tablet Holder Screws, and then tighten them. Make sure that all parts are properly tight- ened. Place a mat beneath the elliptical to protect the floor.
HOW TO USE THE ELLIPTICAL HOW TO PLUG IN THE POWER CORD A temporary adapter may be 2-pole Receptacle This product must be grounded. If it should mal- used to con- function or break down, grounding provides a path of nect the power Adapter least resistance for electric current to reduce the risk...
Page 14
HOW TO MOVE THE ELLIPTICAL HOW TO LEVEL THE ELLIPTICAL Due to the size and weight of the elliptical, moving If the elliptical rocks slightly on your floor during use, it requires two persons. Stand in front of the elliptical, turn one or both of the leveling feet (D) beneath the hold the upright (A), and place one foot against one of rear stabilizer or turn the leveling foot (E) beneath the...
Page 15
HOW TO ADJUST THE POSITIONS OF THE HOW TO EXERCISE ON THE ELLIPTICAL PEDALS To mount the elliptical, hold the upper body arms (H) Each pedal can be adjusted to several positions. To or the handlebars (I) and step onto the pedal (J) that adjust each pedal, simply pull the pedal handle (G) is in the lower position.
Page 16
CONSOLE DIAGRAM FEATURES OF THE CONSOLE resistance of the pedals and the incline of the ramp and prompts you to vary your pedaling speed as it IMPORTANT: To activate your console and begin guides you through an effective workout. using its exclusive features, see assembly step 10 on page 12.
Page 17
HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the elliptical has been exposed to 1. Begin pedaling or press any button on the cold temperatures, allow it to warm to room tem- console to turn on the console. perature before you turn on the power.
Page 18
4. Follow your progress with the display. Time—When the manual mode is selected, this display mode will show the elapsed time. When a The display can show the following workout workout is selected, this display mode will show information: either the time remaining in the workout or the elapsed time.
Page 19
Change the volume level If the display does not show your heart rate, make of the console by press- sure that your hands are positioned as described. ing the Vol increase and Be careful not to move your hands excessively or decrease buttons.
Page 20
HOW TO USE AN ONBOARD WORKOUT show your progress. The flashing segment of the profile represents the current segment of the work- 1. Begin pedaling or press any button on the out. The height of the flashing segment indicates console to turn on the console. the target speed or the resistance level for the cur- rent segment.
Page 21
The workout will continue in this way until the last Next, press the play but- segment ends. ton on your personal audio player. Adjust the volume To pause the console, press the Home button or level using the Vol increase simply stop pedaling.
Page 22
HOW TO CONNECT YOUR TABLET TO THE 5. Disconnect your tablet from the console if CONSOLE desired. The console supports BLUETOOTH connections to To disconnect your tablet from the console, first tablets via the iFit Bluetooth Tablet app and to compat- select the disconnect option in the iFit Bluetooth ible heart rate monitors.
Page 23
HOW TO CHANGE CONSOLE SETTINGS Incline System Calibration—If the incline sys- tem is not functioning properly, it may need to be 1. Select the settings mode. calibrated. To calibrate the incline system, press the Ramp increase or decrease button. The ramp To select the settings mode, press the Settings will move upward and downward as it calibrates.
FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
MAINTENANCE AND TROUBLESHOOTING MAINTENANCE Next, use a standard Regular maintenance is important for optimal screwdriver performance and to reduce wear. Inspect and properly and carefully tighten all parts each time the elliptical is used. pry the left Replace any worn parts immediately. Disc Cover (55) off the left To clean the elliptical, use a damp cloth and a small...
Page 26
HOW TO ADJUST THE DRIVE BELT Then, look between the Shields (73, 74) and locate the M8 Locknut (102). Tighten the Locknut until the Drive If the pedals slip while you are pedaling, even while Belt (113) is tight. the resistance is adjusted to the highest level, the drive belt may need to be adjusted.
EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy.
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...