Yealink VCM35 Manual

Video conferencing microphone

Hide thumbs Also See for VCM35:

Download this manual

VCM35 Video Conferencing Microphone

Introduction

Yealink VCM35 is a wired video conferencing microphone array specially designed for the new generation of Yealink

Video Conferencing System. Its built-in 3-microphone array with a 20ft (6m) and 360° voice pickup range is an ideal

solution for any conference room that needs the best audio experience. With the Yealink Acoustic Echo Canceling

and Yealink Noise Proof Technology, Yealink VCM35 can effectively reduce ambient noise up to 90 dB and give you a

high-quality audio experience in full-duplex calls. Yealink VCM35 supports star-cascaded deployment, and its

extremely high scalability and flexibility make deployment more convenient and faster and can fully cover

conference rooms of various sizes.

VCM35 Compatibility

For the VCM35 compatibility, please refer to

How to Use

Connect MVC to VCM35

Method 1: Connect to the VCH port of the UVC camera/AVHub:

Method 2: Connect via the PoE switch

Teams Room Accessories Compatibility

VCM35 Video Conferencing Microphone

Lists.

Page 1 With the Yealink Acoustic Echo Canceling and Yealink Noise Proof Technology, Yealink VCM35 can effectively reduce ambient noise up to 90 dB and give you a high-quality audio experience in full-duplex calls. Yealink VCM35 supports star-cascaded deployment, and its extremely high scalability and flexibility make deployment more convenient and faster and can fully cover conference rooms of various sizes.
Page 2 Method 2: Connect via AVHub Method 2: Connect via AVHub You can connect the UVC cameras and VCM35 to the AVHub simultaneously. When you connect the UVC84/UVC86 directly to the AVHub, the total number of connections must be no more than 4 devices.
Page 3 VCM35 Video Conferencing Microphone Audio Settings Audio Settings If you want to manually set the specified audio input device after connecting the VCM35 to the MVC device, please refer to Audio Settings. Update VCM35 Update VCM35 After connecting the VCM35 to the MVC device, it will automatically obtain the ROM package from the MVC device to update.