Table of Contents
Advertisement
to the mains supply and leave for 2 to
3 hours on setting number MAX before
introducing the food back into the freezer.
5.2 Replacing the Light Bulb
Important note: Unplug the unit from
the power supply before start the
process.
Images are representative
1
3
1. If available, remove the screw on the
light cover by screw driver. (Fig.1)
2. Press the hooks on light cover. (Fig. 2)
3. Open the light cover towards arrow when
top hooks pull out from housing. (Fig. 3)
4. Pull out the cover towards arrow remove
it. (Fig. 4)
5. Turn the light bulb counter clockwise and
remove it. (Fig. 5)
6. Change the present light bulb with a new
one of not more than 15 W. (Fig. 5)
7. Implement the steps in reverse order.
8. After waiting 5 minutes, plug the unit.
Replacing LED Lighting
To replace any of the LEDs, please contact
the nearest Authorised Service Centre.
Note: The numbers and location of the
LED strips may change according to
the model.
2
5
4
EN - 17
6 SHIPMENT AND
REPOSITIONING
6.1 Transportation and Changing
Positioning
The original packaging and foam may be
kept for re-transportation (optional).
Fasten your appliance with thick
packaging, bands or strong cords and
follow the instructions for transportation
on the packaging.
into the appliance against shocks
using bands when re-positioning or
transporting.
Always carry your appliance in the
upright position.
Advertisement
Table of Contents
