Supply Connections; Installation Checkout - Kohler Intrepid K-7499 Installation Manual

Faucet
Supply Tube
Supply
Shank
Lavatory
Nut
Supply Line

3. Supply Connections

If the lavatory is not installed, install it at this time using the
lavatory manufacturer's instructions. Allow enough space for
penetration of supply tubes into the supply stops. Cut the supply
tubes if necessary.
NOTE: Do not bend or twist the copper faucet supply tube.
CAUTION: Risk of product damage. Never operate this faucet
without the screen correctly installed in the faucet supply shank.
Connect the faucet supply shank to the supply line with the nut
and tighten securely.

4. Installation Checkout

Connect the P-trap.
Ensure that all connections are tight.
Remove the aerator by turning it counterclockwise.
Open the drain.
Open the supply line, press down on the faucet handle several
times and inspect the faucet for leaks. Repair as needed.
1031175-2-A 4
Spout
Aerator
Kohler Co.