Faucet Installation - Kohler K-15182 Installation Manual

Apply
Plumbers
Putty.

1. Faucet Installation

Clean the lavatory surface to remove any grease, oil, or debris.
Apply a ring of plumbers putty or other sealant around the
underside edge of the faucet body according to the putty
manufacturer's instructions.
Insert the faucet into the lavatory holes. Check alignment.
Slide a channel and spacer onto each shank.
Thread a nut onto each shank and loosely tighten.
Position the faucet as desired.
Secure the faucet by securely wrench tightening the nuts.
Wipe away any excess sealant.
Kohler Co.
Channel
Spacer
Nut
3 1010442-2-D