Technical Data; Ec Declaration Of Conformity - DeWalt D25966 Original Instructions Manual

BREAKER
D25966
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
Type
Frequency
Power input (230V)
No-Load beats per minute
Single impact energy (EPTA 05/2009)
Tool holder
Chisel positions
Wireless Tool Control Transmitter
Frequency Band
Max. Power (EIRP)
Weight
Noise values and vibration values (triax vector sum) according to EN62841:
Measured A – weighted sound pressure at the
operator's level L (re 1 pW), in Decibel
PA
Measured A – weighted sound power level L
(re 1 pW), in Decibel
Uncertainty K / K , in Decibel
WA PA
Chiselling
Vibration emission value a
h,Cheq
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However,
if the tool is used for different applications, with different
accessories or is poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
WALT one of the
e
D25966
V 230
AC
1
Hz 50
W 1800
BPM 1080
J 41
28mm Hex
1
MHz 433
mW 0.03
kg 18.8
94
WA 102
3.9
= m/s 2 6.8
2
m/s 1.5
EC‑Declaration of Conformity
Machinery Directive and Radio Equipment Directive
D25966 Breaker
D WALT declares that these products described under
e
Technical Data are in compliance with: 2006/42/EC, EN62841-
1:2015 +A11:2022, EN IEC62841-2-6:2020 +A11:2020.
These products also comply with Directive 2014/53/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
2000/14/EC, Electrical concrete breaker (hand-held), m > 15 kg,
Annex VIII, TÜV Rheinland LGA Products GmbH (0197), D-90431
Nürnberg, Germany, Notified Body ID No.: 0197
Level of sound power according to 2000/14/EC (Article 12,
Annex III, No. 10; m > 15 kg):
L (measured sound power level)
WA
L (guaranteed sound power level)
WA
Markus Rompel
Vice President of Engineering, PTE-Europe
D WALT, Richard-Klinger-Straße 11,
e
65510, Idstein, Germany
21.04.2023
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008 AND THE RADIO
EQUIPMENT REGULATION 2017
D25966 Breaker
D WALT declares that these products described under
e
Technical Data are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended), EN62841-1:2015 +A11:2022,
EN IEC62841-2-6:2020 +A11:2020.
These products conform to the following UK Regulations:
Radio Equipment Regulation, 2017, S.I.2017/1206 (as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
The Noise Emission in the Environment by Equipment for use Outdoors
Regulations 2001, S.I. 2001/1701 (as amended). Electrical concrete breaker
(hand-held), m > 15 kg, Schedule 11, TÜV Rheinland LGA Products GmbH
Tillystraße 2, 90431 Nürnberg, Germany, Notified Body ID No.: 0197
L (measured sound power level)
WA
L (guaranteed sound power level)
WA
EnGLIsh
WALT at
e
103 dB
105 dB
103 dB
105 dB
17