Technical Data - DeWalt D25881 Original Instructions Manual

EnGLIsh
BREAKER
D25881
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
Type
Frequency
Power Input
No-Load Beats Per Minute
Single Impact Energy (EPTA)
Variable Speed Dial
Variable Speed Dial Positions
Chisel Positions
Dust Extraction Shroud
Tool Holder
Weight (including side handle)
Noise values and vibration values (triax vector sum) according to
EN IEC 62841-2-6:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Chipping/Chiselling
Vibration emission value a
h ,Cheq
Uncertainty K =
* Measured at the side handle. Side handle vibration is higher than vibration at
the main handle.
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN IEC 62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However,
if the tool is used for different applications, with different
accessories or is poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
16
WALT one of the
e
D25881
V
AC
Hz
W
bpm 1060–2160
J
DWH051
SDS max®
kg
dB(A)
dB(A)
dB(A)
= m/s²
m/s²
EC‑Declaration of Conformity
Machinery Directive
Breaker
D25881
230
D WALT declares that these products described under
e
1
Technical Data are in compliance with:
50
2006/42/EC, EN62841-1:2015+A11:2022, EN IEC 62841-2-6:2020
1600
+A11:2020.
2000/14/EC Electrical Concrete Breaker (hand held) m </= 15kg,
Annex VIII; TÜV Rheinland LGA Products GmbH (0197), D-90431
17.5
Nürnberg, Germany
Yes
Notified Body ID No.: 0197
7
L
12
WA
L (guaranteed sound power level) dB 105
WA
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
10.4
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
91
99
3
Markus Rompel
Vice President of Engineering, PTE-Europe
D WALT, Richard-Klinger-Straße 11,
e
14.9
65510, Idstein, Germany
30.04.2023
1.5
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
D WALT declares that these products described under
e
Technical Data are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN62841-1:2015+A11:2022, EN IEC 62841-2-6:2020 +A11:2020.
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
(measured sound power level) dB 99
REGULATIONS 2008
Breaker
D25881
WALT at
e
WALT.
e