Output Settings Tab Settings; Settings; How To Use Help - Xerox CopyCentre C118 Software Manual

3 Operation with Windows NT 4.0

Output Settings Tab Settings

This section describes the settings in the Output Settings tab.
NOTE: You can restore defaults by clicking [Restore Defaults].

Settings

Banner Sheet - Specifies whether or not to add a banner sheet to the printed output.
When [Use Printer Settings] is selected, the printer settings are used.
When [Printer Start Page] is selected, outputs the banner sheet using the first sheet.
E-mail Job Confirmation - Specifies whether or not to use the Mail Notify feature to
notify the end of the print job via e-mail. Default is [Off].
E-Mail Address - Specifies the e-mail address for the Mail Notify feature.
Image Rotation (180deg) - Set the checkbox to [On] to rotate the prints by 180°.
Default is [Off].

How to Use Help

The following describes how to use Help.
1.
Click
which you need explanations, opening a pop-up window that contains relevant
information. Click inside the pop-up window to close it.
2.
Click [Help], an explanation of the current tab appears as Help information.
22
and a ? mark appears next to the pointer. You can then click items for
Xerox WorkCentre 118 Postscript® User Guide