Download Print this page

Specifications - Harbor Freight Tools Bauer 231210C-B Owner's Manual

Variable-speed rotary tool with flexible shaft

Advertisement

Grounding
tO preVent eLectric SHOcK anD DeatH FrOM incOrrect GrOunDinG:
check with a qualified electrician if you are in doubt as to whether the outlet is
properly grounded. Do not modify the power cord plug provided with the
charger. never remove the grounding prong from the plug. Do not use the
charger if the power cord or plug is damaged. if damaged, have it repaired by a service
facility before use. if the plug will not fit the outlet, have a proper outlet installed by a
qualified electrician.
extension cords
note: Extension cords must not be used with this item's Charger.
Symbology
V
Volts
Direct Current
a
Amperes
No Load Revolutions
n 0 xxxx/min.
per Minute (RPM)
WARNING marking concerning Risk
of Eye Injury. Wear ANSI‑approved
safety goggles with side shields.

Specifications

Battery
Charger
Maximum Accessory Diameter Ø  1 ‑1/4" (32.5mm)
Rated No Load Speed
Collet Size
Page 10
For technical questions, please call 1-888-866-5797.
Read the manual before
set‑up and/or use.
WARNING marking
concerning Risk of Fire.
Do not cover ventilation ducts.
Charge on fireproof surface only.
WARNING marking concerning
Risk of Electric Shock.
Properly connect Charger's power
cord to appropriate outlet.
WARNING marking concerning
Risk of Explosion.
Do not puncture, short, or open
battery packs and do not charge
damaged battery packs.
Bauer 20V Li‑Ion 57007 (sold separately)
Bauer 20V Li‑Ion 57006 (sold separately)
n 5000 ‑ 33000/min
1/8", M8 Nut
Item 58672

Advertisement

loading

This manual is also suitable for:

58672