Front Section-1 - Sony ZV-1 Service Manual

4-2-6. Front Section-1

[ 13 ] MI shoe shell plate (88100)
Refer to "Notes on Assembling
the MI Shoe Shell Plate (88100)(1)(2)".
[ 12 ] screw
#69 (M1.7 X 3.0)
(0.12 ± 0.02 N·m)
[ 14 ] MIS-2006 flexible board
[ 3 ] Side spacer (64500)
Refer to "Notes on Assembling
the Side Spacer (64500)".
(Note 2)
Note 1
This screw cannot be reused. Discard the screw removed
once in servicing. Instead, use a new screw.
このねじは再利用することができません。
サービス対応時に一度でも外した場合は新品のねじと交換
してください。
[ 11 ] two screws
#373 (M1.7 X 3.3)
(0.20 ± 0.02 N·m)
[ 4 ] screw
#239 (M1.4 X 1.4)
(0.12 ± 0.01 N·m)
*Screw fixing RL-1066
(Note 1)
[ 1 ] screw
#248 (M1.4 X 3.5)
(0.12 ± 0.01 N·m)
[ 2 ] screw
#115 (1.4 X 3.5) (Tapping)
(0.10 ± 0.01 N·m)
[ 7 ] Shoe cap (875)
[ 8 ] MI shoe spring plate (88100)
Refer to "Notes on Assembling
the MI Shoe Spring Plate (88100)".
[ 9 ] two screws
#239 (M1.4 X 1.4)
(0.08 ± 0.02 N·m)
(Note 1)
[ 10 ] MI shoe screw cover (88100)
Refer to "Notes on Assembling
the MI Shoe Screw Cover (88100)".
[ 16 ] Shoe FPC guard (64500)
Refer to "Notes on Assembling
the Shoe FPC Guard (64500)".
[ 15 ] Shoe frame (64500)
[ 6 ] screw
#280 (M1.4 X 4.5)
(0.12 ± 0.01 N·m)
Sony CONFIDENTIAL
For Authorized Servicer
[ 5 ] screw
#280 (M1.4 X 4.5)
(0.12 ± 0.01 N·m)
46
SYS SET