Network Specifications - Xerox 5750 Reference Manual

Expectation Setting Document for Fiery X2 V1.01
Digital Front End for 5765, 5790 DocuColor 5750/ 5799

Network Specifications

Protocol Stack
Novell IPX / SPX
TCP / IP
TCP / IP
AppleTalk
The customer is responsible for supplying one network drop to enable the install.
Printing
STARR Compression
The Compression efficiency is dependent on file type and complexity. Artifacts may be possible when
•
compression is selected depending on the file complexity.
STARR Compression must be selected to support the advanced features in Fiery Options; i.e., collation, reverse
•
order, etc.
Print Speed / System Performance
The maximum print speed for the X2 system is limited by the print speed of the 5765, 5790 and DocuColor 5750/
•
5799.
The 5765, 5790 and DocuColor 5750/ 5799 are document printers; therefore the print engine will not cycle up until
•
the entire job is ready. This will impact First Copy Out Time (FCOT) when STARR Compression is in use. The
copier may cycle down between each job depending on job complexity.
Overall system performance ('Click to Clunk' time) is primarily dependent upon the software applications and
•
network environment being used. Rasterizing (RIP-ing) is only a small fraction of Click to Clunk time.
Printing with custom software applications may produce unexpected or unknown results.
•
Terms and product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged.
Post Launch Version
Page 2 of 7
Printing Supported Frame Types
Services
PServer Ethernet 802.2
Ethernet 802.3
Ethernet_II
Ethernet SNAP
Token Ring 802.2 (option)
Token Ring SNAP (option)
LPD Ethernet_II
Token Ring SNAP (option)
SMB Ethernet_II
Token Ring SNAP (option)
PAP Ethernet SNAP
(EtherTalk Phase 2 only)
Platform
Windows NT
Windows 95
Windows 3.1
Windows NT
Windows 95
Solaris 2.4
SunOS 4.1.x
Windows NT
Windows 95
Windows NT 4.0
Macintosh
26 May 1999
X2_Majestik_ced.doc