Connecting The Comfort Handle; Connecting The Powerunit And The Suction Tube - Miele Triflex HX1R Operating Instructions Manual

Connecting the Comfort handle

Depending on how you decide to
configure your vacuum cleaner, you can
connect the Comfort handle to either
the suction tube or the PowerUnit.
 Push the Comfort handle down onto
the suction tube connector from
above until it audibly clicks into place
(left image detail).
 Slide the Comfort handle along the
guide line on the dust container
handle and down onto the PowerUnit
connector from above until it audibly
clicks into place (right image detail).
 Switch off the vacuum cleaner using
the On/Off switch on the front of the
Comfort handle if you want to
separate the sections.
 Press the release catch and remove
the Comfort handle by pulling it
upwards.
Connecting the PowerUnit and the
suction tube
Depending on how you decide to
configure your vacuum cleaner, the
suction tube is located either above or
below the PowerUnit.
 Slide the suction tube along the guide
line on the dust container handle and
down onto the PowerUnit connector
from above until it audibly clicks into
place (left image detail).
17