Table of Contents
Advertisement
OPERATION
STARTING AND STOPPING THE CHAINSAW
A. Starting Chainsaw:
•
Make sure chain tension is at desired setting. Refer to adjusting the chain tension in the Care
and Maintenance section of this manual.
•
Make sure the bar nuts are tight.
•
Ensure no objects or obstructions are in the immediate vicinity which could come in contact
with the bar and chain.
•
Put battery into the chainsaw until it locks into place.
•
Press in the safety lock. This makes the trigger operational.
•
Press and hold the trigger, and keep it pressed for continued operation.
B. Stopping Chainsaw:
•
Release the trigger.
•
Upon release of the trigger, the safety lock will automatically reset to the lock position.
NOTE: It is normal for the chain to coast to a stop once the trigger is released.
15
Safety Lock
Trigger
Advertisement
Table of Contents
