Xantech MRWC Install Manual

Multi-room web controller

INSTALLATION INSTRUCTIONS

DESCRIPTION

Xantech's technical advances have led to the creation of the MRWC Multi-Room Web Controller.

Right out of the box, the MRWC is capable of controlling Xantech's award-winning MRC88 and

MRAUDIO8X8 distribution amplifier from a web based platform. The integrated web server enables

Xantech products to be controlled, monitored, and accessed from any computer connected to a Local

Area Network (LAN) or the Internet.

RS232/422/485 Serial ports – Fully configurable bi-directional serial port to control A/V

devices.

Integrated Web server – The MRWC features a built-in Webpage to control Xantech

products.

Multi-user support – Advanced operating system supports multiple, simultaneous, non-

exclusive, connections from several computers. Access via a maintenance kiosk and laptop

computer can occur at the same time.

Comes complete with power supply

INSTALLATION – MRC88 and MRAUDIO8X8

You will need an Ethernet hub to create an internal network. The MRWC connects between the

Ethernet hub and the MRC88 or MRAUDIO8X8.

To verify the Ethernet connection, access the MRWC default webpage using a computer connected

to the internal network. A web browser, such as Internet Explorer, is required. In the address window,

type in the host name

08905148A

Multi-Room Web Controller

http://mrwc

or the IP address 192.168.0.200

MRWC

- 1 -

Table of Contents

Do you have a question about the MRWC and is the answer not in the manual?

Page 1 Comes complete with power supply INSTALLATION – MRC88 and MRAUDIO8X8 You will need an Ethernet hub to create an internal network. The MRWC connects between the Ethernet hub and the MRC88 or MRAUDIO8X8. To verify the Ethernet connection, access the MRWC default webpage using a computer connected to the internal network.
Page 2 INSTALLATION – WEB PAGE, Changing SOURCE and ZONE text To change the SOURCE and ZONE names, access the setup page using http://mrwc/sources.html Click the submit button once you are done defining source names and you will automatically be directed to your control page. These names will be kept even if you close your browser, until you go to the sources.html page and change the names.
Page 3 The maximum length is 16 characters, numbers and letters only. This document is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Xantech Xantech Corporation shall not be liable for operational, technical, or editorial errors/omissions made in this document.