Subscribe to Our Youtube Channel
Related Manuals for Osram BY-M45
Summary of Contents for Osram BY-M45
- Page 1 BY-M45 19*30W 4in1 wash zoom beam User manual Please read the instructions carefully before use...
-
Page 2: Table Of Contents
TABLE OF CONTENTS 1. Safety Instructions....................2-4 2. Technical Specifications..................4-5 3. LUX Date........................5 4. How To Control The Unit................. 5-12 5. shape........................13-14 6. Trouble shooting....................14-15 7. Fixture Cleaning...................... 15 statement product well capability intact packing when leave factory. All of the user should comply with warning item and manual, any misuse cause of the damages are not included guarantee,... - Page 3 The unit is for indoor use only. Use only in a dry location. The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent surfaces. Be sure that no ventilation slots are blocked. ...
-
Page 4: Technical Specifications
There are no user serviceable parts inside the unit. DO NOT open the housing or attempt any repairs yourself. In the unlikely event your unit may require service, please contact your nearest dealer. Installation: The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly fixed to avoid vibration and slipping while operating. -
Page 5: Lux Date
Data In/Out socket: 3-pin & 5-pin XLR sockets Power Socket: Powercon in/out Protection Rating: IP20 Features Motorized liner zoom system, zoom range: 6°~55° Outstanding color macro effect Dimmer: 0~100% smooth dimming Variable strobe effects Fast, quiet operation and flicker free Three section, led circle control 3. - Page 6 3 pin XLR connectors: Pin 1: GND, Pin 2: Negative signal (-), Pin 3: Positive signal Display: MENU To select the programming functions DOWN To go backward in the selected functions To go forward in the selected functions ENTER To confirm the selected functions Set DMX Address Code Press "Menu"...
- Page 7 Run Mode 3.Sound 1.Master 2.Alone 1.Pan 1.Yes Pan forward or 2.No reversed setting 2.Tilt 1.Yes Reverse Tilt forward or 2.No reversed setting 3.Display 1.Yes Display forward or 2.No reversed setting Channel 27 channels 27 channel mode 19 channels 19 channel mode Pan angle 540°/360°...
- Page 8 2.Tilt Tilt fine control 3.Focus Zoom fine control 4.Red 0 - 255 5.Green 0 - 255 6.Blue 0 - 255 7.White 0 - 255 DMX channel´s functions and values (19/27DMX channels): 27CH Model: Model Details Function Value 0----255 Movement 0----255 Fine control of Pan movement Tilt Movement 0----255...
- Page 9 Model 4 150----255 Zoom From near to far 0----255 10CH 0----255 11CH 0----255 12CH 0----255 13CH 0----255 14CH 0----255 15CH 0----255 Dark to bright 16CH 0----255 17CH 0----255 18CH 0----255 19CH 0----255 20CH 0----255 21CH 0----255 0----16 2700K 17----23 3200K 24----30 22CH Static color...
- Page 10 Jump 50----99 Gradient 100----255 Show 1 0----19 Show 2 20----39 Show 3 40----59 Show 4 60----79 Show 5 80----99 24CH Show Show 6 100----119 Show 7 120----139 Show 8 140----159 Show 9 160----179 Show 10 180----199 Show 11 200----219 24CH Show Show 12 220----255...
- Page 11 19CH Mode： Model Details Function Value 0----255 Movement 0----255 Fine control of Pan movement Tilt Movement 0----255 Tilt Movement 0----255 Pan/Tilt speed Fast to slow 0----255 0----15 Strobe Strobe slow to fast 16----214 Random strobe 215----255 Dimmer Dark to bright 0----255 Model 1 0----49...
- Page 12 4200K 31----37 5600K 38----44 7 in1 45----255 0----49 15CH Dynamic color Jump 50----99 Gradient 100----255 Show 1 0----19 Show 2 20----39 Show 3 40----59 Show 4 60----79 Show 5 80----99 Show 6 100----119 16CH Show Show 7 120----139 Show 8 140----159 Show 9 160----179...
-
Page 13: Shape
5.Shape... -
Page 14: Trouble Shooting
6. Trouble shooting Following are a few common problems that may occur during operation. Here are some suggestions for easy troubleshooting: A. The unit does not work, no light and the fan does not work 1. Check the connection of power and main fuse. 2. -
Page 15: Fixture Cleaning
1. The stepper motor might be damaged or the cable connected to the PCB is broken. 2. The motor’s drive IC on the PCB might be out of condition. 7. Fixture Cleaning The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize light output.
Need help?
Do you have a question about the BY-M45 and is the answer not in the manual?
Questions and answers