Technical Data - Dantherm IS-1 Installation Manual

Technical data

Technical data
Flat pac delivery
Weight
Frame
Floor
Walls & roof
U-value
Outside measurement
Inside measurement (wall to wall)
Door opening
Door lock entrance
Door lock service door
Air intake
Exhaust air
Fix points for CoolRack KS-1 RT 3
ELECTRICAL CABLING WAY
Type: One 200 mm sheet metal cable ladder on the rear wall and one 100 mm sheet metal
cable ladder in the roof.
FEEDER
Type: Roxtec Comlite 6-18
EXHAUST AIR DAMPER
Damper, type: SP315311, G-profile
Damper actuator: LM24 (24 VDC)
LIGHTING
Type: 230 V, 2x18 W luminance tube
Calculated assembling time: 2 mens work approximate 3 hours
IS-1: 110 kg
IS-2: 250 kg + pallet 20 kg
Aluminium profiles
27 mm hard plywood with antistatic rubberized surface
Sandwich construction with side and end panels of double-walled
galvanized sheet-metal. Blue lacquered exterior. A layer of 25 mm
polyurethane insulation between panels
0,96 W/m²/ºC
IS-1: 1580x850x2250 mm (WxDxH)
IS-2: 2350x850x2250 mm (WxDxH)
IS-1: 1530x800x2200 mm (WxDxH)
IS-2: 2290x790x2190 mm (WxDxH)
2230x2130 mm (WxH)
4-way espagnolette and ASSA key
Push lock in upper position, 2 sliding safety catch
Ø 400 mm
Ø 315 mm via motorised damper
2 st (up and down)
2