Related Manuals for TiGHT AV AU-X2OPRO-DA
Summary of Contents for TiGHT AV AU-X2OPRO-DA
- Page 1 User Manual AU-X2OPRO-DA DANTE 2CH OUTPUT ADAPTER All Rights Reserved Version: AU-X2OPRO-DA _2023V1.0...
- Page 2 DANTE 2CH OUTPUT ADAPTER Product Introduction Thanks for choosing the AU-X2OPRO-DA. The device extracts 2 channels of analog line level audio from a Dante network, supporting sampling rates up to 96kHz using Audinate’s original Dante Ultimo chip. Features Plug and Play •...
- Page 3 DANTE 2CH OUTPUT ADAPTER Panel Description ① Dante(PoE): Dante network ② DC12V: Connect to DC12V power communication port. ③ Output: 1x 6-pin terminal block, for 2 adapter(sold separately). channel output audio signal. ④ Reset: 1x button, pressing and hold 5s for factory default.
- Page 4 ⑤ Gain: 2x 5-pin Dip switch DANTE 2CH OUTPUT ADAPTER for adjusting output gain between +18dBu to -10 dBV per channel. The default setting is +4dBu. LED status According to the working condition of Dante, the network port lights will have different states: Green LED Yellow LED...
- Page 5 DANTE 2CH OUTPUT ADAPTER Technical Specification Audio +18 dBu / +4 dBu / 0 Max output level (balanced) dBu/ 0 dBV /-10 dBV Frequency 20Hz to 20kHz (-/+0.5dB) Response 150 Ohm balanced Impedance 75 Ohm unbalanced Dynamic Range >100 dB Signal to Noise >100 dB Ratio...
- Page 6 Compliance FCC, CE Environmental RoHS, REACH, WEEE Customer Service TiGHT AV provide a limited warranty for the product within five years counting from date of purchase (The purchase invoice shall prevail). For more information see TiGHT AV general Warranty Statement at...
- Page 7 DANTE 2CH OUTPUT ADAPTER Environment and recycle information Disposal of electric and electronic devices EC Directive 2012/19/EU This product is not to be treated as regular household waste but must be returned to a collection point for recycling electric and electronic devices.
Need help?
Do you have a question about the AU-X2OPRO-DA and is the answer not in the manual?
Questions and answers