TiGHT AV AU-X2I-DA User Manual

User Manual
AU-X2I-DA
DANTE 2CH XLR INPUT
ADAPTER
All Rights Reserved
Version: AU-X2I-DA_2022V1.0
DANTE 2CH XLR INPUT ADAPTER
Product Introduction
Thanks for choosing the AU-X2I-DA.
The device inputs 2 channels of
analog line level
distributed through
network, supporting sampling rates
up to 96kHz, using Audinate's original
Dante Ultimo chip.
Features
Plug and Play

Dante and AES67 support

24-bit audio support

2X0 audio channels

Supports 802.3af PoE

Packing List
1x AU-X2I-DA

1x User Manual

audio to be
your Dante
Panel Description
① RJ45: Dante network
communication port.
Green steady light indicates link;
yellow flashing light indicates
data traffic. The green light will
flash to identify the device when
clicking the Dante Controller
"Identify" button (an eye-shaped
② XLR: 2 x XLR-F connectors, for
symbol) on the host computer
input signal
Customer Service
We provide limited warranty for the
product within five years counting
from date of purchase (The purchase
invoice shall prevail).
Note: Please contact your distributor
immediately if any damage or defect in the
device is found.