Cleaning And Maintenance - CookTek HTF-9500-SH18-1 Owner's Manual

Owner's Manual
For CookTek Single Hobs, Double Hobs, and Woks

CLEANING AND MAINTENANCE

Your CookTek Induction Cooktop is easy to keep clean. Follow the instructions below.
• Turn the unit OFF and remove the plug from any power outlets prior to cleaning.
• When the unit is cool, wipe the surface and body with a damp cloth. Use a mild scouring agent on
the stainless steel housing such as Bon Ami or Barkeeper's Friend for greasy or resistant soiling.
Do not use a lye-based cleaner, such as an oven cleaner, as it may damage the cooktop.
• To clean the glass surface, use a mild detergent or glass cooktop cleansing cream.
• Never immerse the cooktop in water or put it in the dishwasher.
Grease Filter Maintenance
This unit comes equipped with a grease filter(s) to protect the electronics from contaminants.
Grease filter cleaning procedures:
Frequency
• Grease filter(s) should be removed and cleaned every two weeks. More frequent cleaning may be
necessary if they appear clogged and/or operate in heavy grease laden environments.
Procedure
• Slide filter(s) out of the track on the bottom of the unit.
• Rinse with hot water to remove dirt and grease.
• Shake remaining water out and let stand until completely dry before reinstalling.
• Reinstall filter(s) ensuring the arrow on the edge of the filter(s) is pointing into the unit.
NOTE: Filters are also dishwasher safe.
CAUTION
• Do not operate the unit without the grease filter(s) installed.
• If the unit displays and error code of "E4" - the overheat error - this may indicate a clogged filter.
Follow the procedure above and let the unit cool down before resuming operation (turn off for
approximately five minutes).
DOC-1868 / Rev A / January 2024
9