Hob Frame (Option); To Avoid Damaging Your Appliance; Troubleshooting And Service; Troubleshooting - Samsung NZ64B5046GK User Manual

Hob frame (option)

WARNING
Do not use vinegar, lemon juice or scale remover on the hob frame; otherwise dull
blemishes will appear.
1. Wipe the frame with a damp cloth.
2. Moisten dried debris with a wet cloth. Wipe and rub dry.

To avoid damaging your appliance

• Do not use the hob as a work surface or for storage.
• Do not operate a cooking zone if there is no pan on the hob or if the pan is
empty.
• Ceramic glass is very tough and resistant to temperature shock, but it is
not unbreakable. It can be damaged by a particularly sharp or hard object
dropping onto the hob.
• Do not place pans on the hob frame. Scratching and damage to the finish may
occur.
• Avoid spilling acidic liquids, for example, vinegar, lemon juice and descaling
agents, onto the hob frame, since such liquids can cause dull spots.
• If sugar or a preparation containing sugar comes into contact with a hot
cooking zone and melts, it should be cleaned off immediately with a kitchen
scraper while it is still hot. If allowed to cool, it may damage the surface when
removed.
• Keep all items and materials that could melt, for example, plastics, aluminium
foil and oven foils, away from the ceramic glass surface. If something of this
nature melts onto the hob, it must be removed immediately with a scraper.

Troubleshooting and service

Troubleshooting

A fault may result from a minor information that you can correct yourself with
the help of the following instructions. Do not attempt any further repairs if the
following instructions do not help in each specific case.
WARNING
Repairs to the appliance are to be performed only by a qualified service technician.
Improperly effected repairs may result in considerable risk to the user. If your
appliance needs repair, please contact your customer service centre.
Problem Possible cause
What should I do if the • The fuse in the house
cooking zones are not wiring is not intact.
functioning?
What should I do if the
• The On/Off
cooking zones will not
was accidentally
switch on? actuated.
• The control panel is
partially covered by a
damp cloth or liquid.
What should I do if the
• The On/Off
display except for , was accidentally
the residual heat actuated.
The control panel is
indicator suddenly •
disappears? partially covered by a
damp cloth or liquid.
What should I do if, • The cooking zone
after the cooking was only briefly used
zones have been and therefore did not
switched off, residual become hot enough.
heat is not indicated in
the display
Solution
• If the fuses trip a
number of times,
call an authorised
electrician.
• The appliance is
key
properly switched on.
Clean the control
•
panel.
• The appliance is
key
properly switched on.
• Clean the control
panel.
• If the cooking zone is
hot, please call a local
service centre.
English 27