AFETY AFETY LERTS OSSIBLE OURCES OF ANGER The safety alert symbol is used in decals on the unit This device is part of a system that makes remote and with proper operation procedures in this control via radio signals possible. However, the manual.
NTRODUCTION Thank you for purchasing the Hetronic radio remote Before start up, ALWAYS confirm that the machine control system. Hetronic radio remote controls and radio remote control Stop functions work provide outstanding remote control value, quality, properly. performance, and safety.
EATURES 2 rechargeable batteries. For your convenience ENERAL ESCRIPTION there is an optional battery adapter case for 3 AA The Nova-S is a radio control transmitter, that is batteries available. specifically configured for your application. -S F EATURES For configuration details, see the documentation •...
HEORY OF PERATION Your transmitter works with a receiving device to UNCTION transfer machine control commands via radio The most important feature of the radio remote frequency to your machine. control system is the Stop function. When the The transmitter electronically generates a carrier transmitter is turned on, it performs a self-test to frequency that allows it to communicate with the confirm that communications are within designated...
When the battery is fully charged, the “READY” LED DEBRIS can cause death or serious injury. lights up and the “CHARGE” LED goes off. Use only Hetronic replacement rechargeable NOTE: Charging time could take up to 5 hours, batteries. Use of unauthorized replacement depending on the condition of the battery.
If you have questions or problems operating your battery charger, please contact your dealer or Hetronic. Standard Hetronic rechargeable batteries are the nickel metal hydride type. These batteries have no “memory effect” when charging a battery that is not fully discharged.
PERATING RANSMITTER EFORE PERATION STOP WARNING: Test the STOP function. Pushbutton NEVER operate the machine if the STOP function does not work properly. Check the condition of your transmitter once a day, before the start of an operation and at shift changes: •...
TOPPING RANSMITTER Press the STOP pushbutton. MERGENCY TOPPING Press the STOP pushbutton. Confirm that all dangerous situations are corrected before restarting the transmitter. NOTE: The STOP function responds faster than any other function. When the STOP is engaged, the system ignores any other signal that is transmitted STOP must be disengaged before the system will respond to any other signal...
Tighten or replace antenna loose or missing External antenna (if used) has Tighten antenna and ground loose connection, poor grounding connection. Contact Hetronic or your or interference Dealer for more information All machine motions operate Control wiring too close to high...
PECIFICATIONS Housing: PA + 30% glass fill Environmental Protection: IP 65 (Exceeds Nema 12/13) Weight: 1.3 lbs, 575 g, including battery Dimensions: Height: 125 mm (4.9 in.) Width: 160 mm (6.3 in.) Depth: 70 mm (2.8 in.) Antenna: Internal Power Supply: 3.6V NiMH rechargeable battery Optional: 3 AA batteries (3 Mignon LR6-AA 1.5V) Diagnostics:...
Page 13
Hetronic. Technical information subject to change without notice. Hetronic reserves the right to discontinue, make changes to, and add improvements upon its products at any time without public notice or obligation. Hetronic disclaims liability for any claims or damages, whether regarding property, personal injury or death arising out of the use of unauthorized replacement parts or service.
Need help?
Do you have a question about the NOVA-S and is the answer not in the manual?
Questions and answers