Advertisement
Chapter 5
elf your computer is not equipped with a Centronics
parallel interface or an RS-232C serial interface then
you will need to purchase one for your computer.
eSwitch off the power before proceeding with the
connections.
One
of
the
two
adaptors
(RP-K100
and
RP-K105) is supplied in some countries.
RP-K100/
2
Set
the
RP-K105
to
the
On/
Line Mode. Then send a
print command from the
computer.
3
To stop printing tempor-
arily, press
the PRINT
ON/OFF
Key
of
the
RK-T32.
PRINT.
ON/OFF
Press it again to resume
printing.
eWhile
data is being received
by the Interface
Adaptor, the Carriage automatically returns when it
reaches the right margin. The paper advances one
line and printing continues.
@When the PRINT ON/OFF Key is pressed, printing
will stop after the current line has been printed.
®To
exit the External Mode, press the 5 Key while
pressing the CODE Key again.
[For RP-K100]
[39]
PRINTER
Advertisement
