Generally, all moving metal parts should be oiled where
contact is made with other parts. Keep oil and grease off belts
and pulleys. Remember to wipe fittings and surfaces clean
both before and after lubrication.
25
26
26
27
Lubricating the ForeFront Suspension
Control Arms
Interval: Every 50 hours.
Lubricate the ends of the four (4) ForeFront™ suspension
control arms with a petroleum based chain lube at the areas
identified as "A" in Figure 28.
28
Lubricating the Front Casters
Interval: Front caster wheel axles (A, Figure 29) - Every 25
hours.
Interval: Front caster yoke axles - Yearly.
1. Remove the 1/4-28 bolt (B, Figure 29) screwed into the
caster and install a 1/4-28 grease fitting.
ferrismowers.com