Table of Contents
Advertisement
Chapter 2
JP6 (Enable/Disable USB 0/1 Device Wake-Up Jumper):
Pin
Definition
1-2
Disable (default)
2-3
Enable
this jumper's cap to pins 2-3 to use this function.
CN2/2A(CD-ROM Audio-in Connector)
Use the audio cable enclosed with your CD-ROM disk drive to connect the
CD-ROM to your motherboard. This will enable your CD-ROM's audio function.
CN3 (Auxiliary Audio-in Connector)
This connector is for the use of Auxiliary Audio-in Device
CN4B (Sub-Woofer)
This connector must be connected to a 6-channel bracket.
CN5 [WOL (Wake-on-LAN) Connector]
Enable the Wake Up On LAN selection in BIOS's Power Management Menu to
use this function. The capability to remotely manage PCs over networks is a
significant factor in reducing administrative and ownership costs. Magic
Packet technology is designed with WOL ability to LAN controllers. This
header is used to connect an add-in NIC (Network Interface Card) that provides WOL function
to the motherboard.
CN5A [WOM (Wake-on-Modem) Connector]
Enable the Wake Up On Modem selection in BIOS's Power Management
Menu to activate this function. This header is used to connect an add-in
modem card, which provides WOM function to the motherboard.
CN13 (S/PDIF Out)
To enable the S/PDIF function this connector must be connected to a S/PDIF
bracket.
18
An USB keyboard hot key or an USB mouse-click can activate
this board. To use this function, select a hot key of your choice
at the USB Resume from S3 option under Wake Up Events in
the BIOS's Power On Management screen. You must also set
Advertisement
Table of Contents
