4.2
Reading the alarms
The last three alarms stored in the FLASH memory of the PCB can be
displayed:
•
Enter the diagnostic mode.
•
Irrespective of the type of PCB and configuration, turn the programme
selector knob clockwise to the tenth position.
•
The last alarm is displayed.
•
To display the previous alarms, press the button to the left of the
START/PAUSE button in sequence (as shown in the figure).
•
To return to the last alarm, press the START/PAUSE button
2010 SOI/DT-mdm FCPD-dp Quality tb
Guide to diagnostics for electronic controls EWM0931x
A 3 – Z 3
A 5 / 6 – Z 5 / 6 – K 6.2
12/67
599 72 97-24