Omron WT30-CA2M Operation Manual page 15

Communications between WT30 Terminals
Communications with Unregistered Slaves
(No Scan List Registration)
Nodes can be added,
changed, or moved.
I/O Slave Station
No. 2
Communications are performed with
specified I/O Slave Stations on the same
frequency channel within the signal range.
Scan list registration is not required, so I/O
Slave Stations can be added and replaced
using switch settings only. (See note 1.)
Note
Applied Functions
Communications Error
Output Control
Serial Number Check
Replacing WT30
Terminals
Installation Methods
Available Frequencies
I/O Terminal Details
Useful Functions
Monitoring All Wireless
Channels Automatically
xii
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
PLC
Serial Master Station
I/O Slave Station
No. 1
1. Refer to 3-4 Using Unregistered Communications Partners on page 42.
2. Refer to 3-5 Registering the Communications Partner on page 45.
Select the status of output terminals if errors occur during wireless communi-
cations.
Note Refer to 3-6-6 Output Control for Communications Errors on page 56 under 3-
6 Function Setting Switch.
Perform communications with a specific I/O Slave Station registered in the
Serial Master Station including the serial number (the serial number is the
product's unique number).
Note Refer to 3-6-1 Scan List Registration on page 50 under 3-6 Function Setting
Switch.
Refer to page 73.
Refer to page 22.
Refer to page 105.
Refer to page 28.
Refer to page 38.
Communications with Registered Slaves
(Scan List Registration)
EEPROM
Unregistered
I/O Slave Station
No. 2
Communications are performed only with those
I/O Slave Stations within the signal range with
the same frequency channel and that are
registered in the Serial Master Station. Select
whether to register the serial number of the I/O
Slave Station when registering it in the Serial
Master Station. (See note 2.)
PLC
Serial Master Station
I/O Slave Station
No. 1 is registered
in EEPROM.
Registered
I/O Slave Station
No. 1