• Additional X10 automation modules such as plug-in lamp and appliance modules and wired-in replacement wall switches. This manual describes the installation process for the Console and Pendant Remotes. It does not cover the additional X10 automation modules which are supplied with their own installation instructions. Installation...
For applications where this is not practical, the console may also share a line with an existing telephone using a “T” adapter. Note: The X10 Personal Assistance Console is not designed to operate with an RJ31X type telephone connection. Installation...
To switch on a lamp or appliance, press the left side of the numbered key that matches the Unit Code on the X10 module being controlled. Press the Bright and Dim keys to adjust the brightness of lamps connected to Lamp Modules or Wall Switch Modules.
Remote Switch Modules A wide range of switch and control modules are available from X10, all of which work together with the Personal Assistance System. Modules available include replacement wall switches, X10 controlled AC outlets, screw-in lamp modules, plug-in appliance modules and many others.
Battery Information General X10 Pendant Remotes are designed to operate for approximately two years when fitted with a 3V lithium cell. Since operating conditions vary from installation to installation however, it is recommended that all batteries are replaced once a year.
Intercom systems which send voice signals over existing electrical wiring may interfere with the ability to control modules from your X10 Personal Assistance system with the intercom in use. If the intercom system has its own separate wiring it will not cause a problem.
X10 WARRANTS ITS PRODUCTS TO BE FREE FROM DEFECTIVE MATERIAL AND WORKMANSHIP FOR A PERIOD OF ONE (1) YEAR FROM THE ORIGINAL DATE OF PURCHASE AT RETAIL. X10 AGREES TO REPAIR OR REPLACE, AT ITS SOLE DISCRETION, A DEFECTIVE X10 PRODUCT IF RETURNED TO X10 WITHIN THE WARRANTY PERIOD AND WITH PROOF OF PURCHASE.