Download Print this page
X10 UX21A Owner's Manual

X10 UX21A Owner's Manual

X10 ux21a cctv system-cameras: owners manual

Advertisement

Quick Links

VCR C
OMMANDER
AND
VCR C
II
OMMANDER
OWNER'S MANUAL
VCR C
,
VCR C
II
OMMANDER
AND
OMMANDER
M
UX21A
UX23A
ODELS
AND

Advertisement

loading

Summary of Contents for X10 UX21A

  • Page 1 VCR C OMMANDER ™ VCR C ™ OMMANDER OWNER’S MANUAL VCR C VCR C OMMANDER OMMANDER UX21A UX23A ODELS...
  • Page 2: Table Of Contents

    VCR Commander II Options ... 10 Troubleshooting ... 11 NTRODUCTION The VCR Commander works with your X10 cameras and wireless motion sensors to record video on your VCR. When your motion sensor is activated and turns on a camera, the VCR Commander automatically starts your VCR and records the action.
  • Page 3: Basic Setup

    Basic Setup Press and hold PLAY until the red light stays on. Press the HOUSE button on the motion sensor. The red light on the VCR Commander will go out. This motion sensor will now start your VCR Commander. Point the motion sensor away from where you are working and away from motion so that you can set up the rest of the system.
  • Page 4 Basic Setup Press REC on the VCR Commander and release it. The red light blinks quickly and then stays on. Press the Record button on your remote and keep pressing until the red light on the VCR Commander briefly goes out and comes back on solid. This means that Record has been learned.
  • Page 5: Testing The System

    ASIC PERATION Testing the System Now that you have set up your VCR Commander, you are ready to test the system. Your VCR should be on and have the camera selected as its video source. Place the motion sensor in a location where you want it to detect motion. Leave that area and wait one minute for the motion sensor to settle.
  • Page 6: Vcr Commander Ii Options

    VCR Commander II has three features that aren’t available in the standard VCR Commander (UX21A). Programming Multiple Motion Sensors The VCR Commander II works with up to four X10 wireless motion sensors. To setup additional sensors, put batteries in them. Start by programming the first motion sensor: 1.
  • Page 7 (1) year from the original date of purchase at retail. X10 agrees to repair or replace, at its sole discretion, a defective X10 product if returned to X10 within the warranty period and with proof of purchase.

This manual is also suitable for:

Ux23aVcr commanderVcr commander ii