Fisher & Paykel OB30SDPTDX2 User Manual page 56

General
PROBLEM
The oven has reached the
set temperature but the
temperature dial halo is
still red*.
The temperature dial halo
never turns white when I
use *.
BROIL
The oven sounds a tone
when I try to set the
temperature below a
certain temperature.
The oven cancels
automatic cooking
when I try to adjust the
clock setting.
The displays work,
and the function and
temperature dials halos
come on but the oven
does not heat up.
The oven door does not
align with the control
panel or surrounding
cabinetry.
Temperature is not
calibrated correctly.
54
TROUBLESHOOTING
POSSIBLE CAUSES
The oven is set to
MAXI BROIL
This is normal: the halo stays red
to indicate that the broil element
provides instant radiant heat.
This is normal: for food safety
reasons, the oven functions
have factory-set minimum
temperature settings.
The oven was set for automatic
cooking when you were trying to
adjust the clock setting.
The oven is in 'Demo' mode.
The oven door has been installed
incorrectly and the hinges are
misaligned within the slots.
Door is not sealing correctly.
WHAT TO DO
. This is normal. The dial halo* will
stay red whenever this function is
in use as the broil element is always
heating.
Select a different temperature or try
a different function that is designed
for low temperatures.
You can only adjust the clock
setting while the oven is not set for
automatic cooking.
Call Customer Care.
Re-install the door.
See 'Removing and refitting the
oven door' for instructions.
Re-install the door.
See 'Removing and refitting the
oven door' for instructions.
*some models only