Table of Contents
Advertisement
3.3 Applications
WARNING
Service personnel
• The TID0102-HDL may only be used by service personnel that perform technical instal-
lations either in medical environments or of signal processing systems.
• When the TID0102 is used with the LMM0804, service personnel must also have knowl-
edge of LMM0804 operation.
Use of the TID0102 as a DVI splitter with the LMM0804
Note
When operating the TID0102-HDL at a LMM0804 the DIP switch 5 on the front should be
mandatory on "DVI 1 or HDL 1" (OFF).
•
The specific DVI dual link signals of the LMM0804 are split into two configurable DVI sin-
gle link signals.
•
Two TID0102 may be used per LMM0804.
•
The 0.5 m dual link DVI cable for connecting the LMM0804 is included in the scope of
delivery.
•
The maximum recommended length of single link DVI cable at the outputs is 3 m.
•
A power supply unit is not required.
TID0102-HDL
Instructions for Use, 05/2019
Description
3.3 Applications
13
Advertisement
Table of Contents
