Hsrx Controls Servicing Details - Hamilton Jet HJ241 Manual

8 MAINTENANCE
8.5 S D
ERVICING ETAILS
8.5.2 HSRX Controls Servicing
Details
ITEM NO
1 HSRX Pump Oil
Check
2 HSRX System
Hydraulic Oil
Replacement
Figure 28: HSRX Hose Connection Schematic
8.12
ITEM
Daily; Unscrew the Filler Cap on the top of the Pump Reservoir
( The Filler Cap is fitted with an integral Dipstick) and check the
oil level. Insert a funnel and top up the Reservoir with an ap-
proved oil to the 'MAX' Dipstick mark, . Refer to Drawing
85018 Recommendation for Lubricants and
Should the oil show signs of discoloration, contamination or
degradation, the Oil should be changed.
Change the HSRX System Oil every 1000 hrs (Oil changes may
be varied to suit operating conditions).
To change the Oil, carry out the following procedure:
1. Place a suitably sized container beneath the Tank.
2. Disconnect the Jubilee Clip [H4] securing the Hose [H3] from
the Jet mounted Oil Cooler to the Pump.
3. Remove the Hose [H3] from the Pump and allow the oil to
drain from both the Pump Oil Tank and the Oil Cooler, into
the collection container.
4. Once the oil has drained out, refit the Hose [H3] to the Pump
and tighten the Jubilee Clip [H4].
Refer to Section
to Figure 28: HSRX Hose Connection
OPERATION

8.5.2 HSRX Controls Servicing Details

Schematic.
HJ-241 / HSRX
Oils.
also refer