Table of Contents
Advertisement
HJ-241 / HSRX
4. Drive Shaft:
Item
No.
4.1
Ensure driveline details have been approved by CWF Hamilton & Co Ltd.
4.2
On universal joint Driveshafts (Refer to the Design Basics Section in the
Product Manual) check:
• Yoke offset angles are in the same plane, are equal and are <5º.
• Yokes are in the same plane.
4.3
On Bearing supported Line Shafts (Refer to the Design Basics Section in the
Product Manual) check:
• The Support Bearings are aligned with the Engine Flywheel.
• Outer Support Bearings are close to the end of the Couplings.
Check to be Carried Out
Remarks:
Appendix
Completed
A.11
Advertisement
Table of Contents
