Recommended Oils And Lubricants - Hamilton Jet HJ241 Manual

HJ-241 / HSRX
8.8 RECOMMENDED OILS AND
LUBRICANTS
Recommended oils and lubricants required are
specified on Drawing 85018 Recommendation for
Lubricants and Oils in this Manual.
NOTE: Do not use brake fluid or heavier viscosity
oils.
RECOMMENDED HYDRAULIC OILS:
A mineral base hydraulic oil is recommended which
contains anti-wear additives of a type that are active
under boundary lubrication conditions at low
temperatures. Oil viscosity should be 20cS
approximately at 40°C and 4cS at 100°C. Normal
operating temperature should lie between +30°C
and +60°C.
For recommended oils, refer to the drawing referred
to above:
NOTE: Any hydraulic fluids meeting "General
Motors Power Steering Specifications" are
suitable.
Table 12: Other Lubricants
TYPE
B.P. Energrease
MM EP2.
Anti Sieze
Compound.
Anti-Seize compounds
Do not use anti-seize compounds
which are based on graphite,
nickel or copper flakes - these will
C
AUTION
cause corrosion. Anti-seize
compounds, usually containing
zinc flakes, are available for
aluminium.
EQUIVALENT
or similar.
Rocl, YIGG, Jet-Lube,
Nikal or similar.
8 MAINTENANCE
8.8 R O
ECOMMENDED ILS AND
L
UBRICANTS
8.17