For European Users - Epson SC-F500 Series General Information Manual

SC-F500 Series General Information
Interface Specifications
Standards
IEEE802.11b/g/n
Frequency Range 2.4 GHz
Coordination Infrastructure
Modes
Wi-Fi Direct (Simple AP)
Wireless Securities WEP (64/128bit)
WPA-PSK (TKIP)
WPA2-PSK (AES)
WPA3-SAE
WPA2-Enterprise (AES)
WPA3-Enterprise
Network Printing EpsonNet Print (Windows)
Protocols/Func- Standard TCP/IP (Windows)
*7 WSD Printing (Windows)
tions
Bonjour Printing (Mac)
IPP Printing (Mac)
Printing from FTP client
Security Protocols SSL/TLS (HTTPS Server/Client,
IPPS)
IEEE802.1X
IPsec/IP Filtering
SMTPS (STARTTLS, SSL/TLS)
SNMPv3
*1 Use a category 5 or higher STP (Shielded twisted pair) cable.
*2 The connected device should comply with IEEE802.3az
standards.
*3 IEEE802.11n is only available for the HT20.
*4 Not supported for IEEE 802.11b.
*5 Complies with WPA2 standards with support for WPA/WPA2
Personal.
*6 192-bit security is not supported.
*7 EpsonNet Print supports IPv4 only. The others support both
IPv4 and IPv6.
Warning:
To prevent radio interference to the licensed service,
this device is intended to be operated indoors and
away from windows to provide maximum
shielding. Equipment (or its transmit antenna) that
is installed outdoors is subject to licensing
Ink Specifications
Type Dedicated ink bottle
Specifications Table
Ink Specifications
*3
Dye sublimation
ink
Print quality guar-
*4
antee expiry
Storage temperature
*5
*6
Capacity
*The ink supplied differs depending on the model.
c
The ink freezes if left in the ink bottles at below -20
˚C for a long time. If it does freeze, leave it at room
temperature (25˚C) for at least two hours.

For European users

Radio Equipment Information
This product intentionally emit radio wave described as
follows.
(a) frequency band in which the radio equipment
operates; 2.4 to 2.4835 GHz
(b) maximum radio-frequency power transmitted in
thefrequency band in which the radio equipment
operates;20dBm (eirp power)
15
Black, Cyan, Magenta, Yellow,
* Fluorescent Pink, Fluorescent
Yellow
25 days (from the day the ink tank
was refilled with an ink bottle)
Uninstalled -20 to 40˚C (Within four days at -20
˚C, within a month at 40 ˚C)
Transporting -20 to 60˚C (Within four days at -20
˚C, within a month at 40 ˚C, within
72 hours at 60 ˚C)
140 ml
Important: