Physical Layout; Function Keys - Modulus COMP-U-DIFF 10-329 Operating Manual

PHYSICAL LAYOUT

FUNCTION KEYS

Six function keys are located directly above the keypad area as shown in the
diagram below. Three of these keys access multiple screens where each key
depression advances to the next screen.
The function keys operate in the following manner each time one is
depressed.
[MODE]
[MORPH/COMMENT]
[COUNT]
[EXEC]
[CLEAR].
[SEND]
[CLEAR] + [MORPH]
* NOTE: [ ] DENOTES A KEY
STORE à RECALL à BATCH
RBC1 à RBC2 à RBC3
RBC4 à CMMT.....etc.
COUNT à PERCENT COUNT ....etc.
In STORE Mode. Writes report to batch
memory.
In RECALL Mode. Rewrites updated report
to batch memory.
In STORE Mode. Clears local memory.
In RECALL Mode. Clears selected report
from batch memory.
In BATCH Mode. Clears ALL reports in
batch memory.
In STORE Mode. Transmits current results
to laboratory computer.
In RECALL Mode. Sends selected results to
laboratory computer from batch memory .
In BATCH Mode. Sends ALL results stored
in batch memory to computer.
Status Screen (user selectable programs.)
5