Table of Contents
Advertisement
Using the Digital Still Camera
To delete all image pages
You can delete all images from memory with one easy operation.
Warning : Once deleted, images cannot be restored.
Before you begin...
* Connect the Camcorder to a power source.
* Set the POWER switch to PHOTO and slide
the PHOTO MODE selector to PLAY.
1 Press DEL(STILL) to display the
DELETE menu and select EWH.
* To exit this menu,
press STOP.
[ 7j ek E]
Ji)
SELECT ; PUSH +- KEY
SET
: PUSH
DELETE
KEY
CANCEL:
PUSH STOP KEY
2 Press DEL(STILL). The following
message will appear.
* To exit this menu,
press STOP.
| |i ji jJ
STILL
DEL
DELETE PAGE
ARE YOU SURE
YES
: PUSH DELETE KEY
CANCEL:
PUSH STOP KEY
3 Press DEL(STILL) to delete all image
pages from memory.
* "PLEASE WAIT" is displayed
on-screen while all image pages are
turn off the Camcorder or unplug the AC
PLEASE WAIT
Adapter.
Otherwise, the Camcorder will not work for
about 30 seconds when turned back on or
when the AC Adapter is plugged back in
s After deletion is completed.
because the image deletion must be
"NO PICTURE" will be displayed.
performed.
When it becomes impossible to record, playback, or delete image pages
while in PHOTO mode, please delete all memorized image pages by doing
the following.
While holding down NEG/POS , STILL and BACKLIGHT at the same time,
slide the POWER switch from OFF to PHOTO.
All image page deletion will be completed in about 30 seconds. Slide the
POWER
switch to OFF, and then to PHOTO. You can now record, playback,
or delete image pages normally.
Advertisement
Table of Contents
