Table of Contents
Advertisement
You can use this feature for security purposes by recording over a long period of time
(up to 6 hours with a T-40 tape).
MENU
DISPLAY
RECORD/
PAUSE
Note (in Time Lapse mode) :
+ Sounds can not be recorded.
* Picture quality is lower than SLP mode.
* The tape is recorded at 1/3 the speed of SLP.
* The tape is played back at normal SLP speed
(3 times faster than it was originally recorded).
* Video noise may occur during playback.
¢ SP/SLP indications will not be displayed.
* Titles will not be displayed.
* Interval REC cannot be activated.
* Vertical jitter may occur depending on monitor
used.
* 10-Second Reminder (see page 19) will not
display during Time Lapse recording.
* Vertical jitter may occur in color-EVF during
playback.
CAUTION:
* Because recording system for the
Time Lapse feature is not part of VHS
standard, it is recommended to
playback tapes recorded in Time
Lapse mode on this Camcorder.
* Tapes not recorded in Time Lapse
mode may be played back on other
MEC type camcorders or
type
s.
Before you begin...
* Connect the Camcorder to a power source.
For extended Camcorder use, the AC Adaptor
is recommended as the power source.
* Insert a cassette with record tab (see page 12).
* Set the POWER switch to CAMERA.
* Slide the TAPE SPEED Selector to SLP.
1 Press the MENU button to display
the MENU mode. Press UP A or
DOWN Y 72
d to select
* PROGRAMMED
REC
* TITLE
- TALLY
LAMP
* STAND-BY
RELEASE
» CLOCK
SET
SELECT:
PUSH
V/A KEY
TME LAPSE
E
NU
us
the DISPLAY button to set ON
or OFF.
ON:
You can create an extended recording
(up to 6 hours). This recording can then
be played back at x3 speed.
OFF:
An extended recording (up to 6 hours)
will not be possible.
$31
jei
eos
the MENU button to set your
selection and exit this screen.
Abres: RECORD/PAUSE button for
recording START and STOP,
T.LAPSE
PAUSE
TIME LAPSE
To cancel Time Lapse mode: Select
AUST;
OFF from the menu
screen.
45
Advertisement
Table of Contents
