Operation; Technical Specifications - STEINEL 400 Operating Instructions Manual

All manuals and user guides at all-guides.com
L400_10spr.qxd 31.07.2008

Operation

In order to switch on the Weather can affect the
light without a heat source function of the sensor light
in the detection zone, fixture. Strong gusts of
switch the indoor power wind, snow, rain or hail may
switch momentarily. This cause switching errors,
will activate the light for because the unit cannot
the period selected. distinguish the sudden
change of temperature.

Technical Specifications

Line voltage:
Power output:
Power consumption:
Detection angle of sensor:
Swivelling range of sensor:
ON time, adjustable:
Lighting threshold, adjustable:
Brightness setting:
Sensor range (dependent on sensor setting,
ambient temperature, and direction of approach)
From the front:
From the side:
Type of enclosure:
Ambient temperature:
13:51 Uhr Seite 12
The Fresnel lens should be
periodically wiped clean
with a damp cloth if it gets
dirty.
Do not use any cleaning
materials.
220 – 240 V/50 – 60 Hz
max. 60 watts (no low-energy bulbs)
1.3 W
360° all-round lens
(with 120° angle of aperture)
2 x 40° in every direction
10 sec. to 15 min.
2 – 2,000 lux
0 – 50% (Watt-o-matic)
12 m (40 ')
16 m (20 ')
IP 44, splashproof
– 25 °C to + 55 °C (– 13 °F to + 131 °F)
11